Screw Loose

 My wife’s current favorite pocketknife, a purple SixLeaf, lost the screw holding the clip to the body.  Fortunately, the knife slipped further into her pocket, and somehow, the clip was retained.  The screw, however, vanished.

Of course, I wanted to repair it.  SixLeafs aren’t that expensive and but there are no local distributors I can contact for a replacement screw. 

Fortunately, I had a SixLeaf of my own and was able to confirm it was the same screw.  But what kind of screw?

She wanted the purple one and I opted for green

My friend Derrick speaks fluent machinist.  He was able to identify it as 2.5mm X .45 screw.  In the bonus round, he even produced the proper replacement screw.

We had the knife and the clip and when we got the screw, well, everything worked.

That greatly simplified my job.  I didn’t want to force an incorrect thread into the knife's titanium frame, so having the correct one was excellent. 

Lot of brands available, any one would work

I got out my semi-permanent (blue) threadlock and #9 Torx drivers and went to work.  I used a single drop and let the threadlocker wet the threads and drained off the excess into a paper towel.  This left me with a tiny ribbon of blue winding around the thread root.  I screwed everything back together, finger-tight.

Done!

My wife got her favorite knife back, so it’s a great outcome in my book.

Thanks, Derrick!

SixLeaf Knives

 My friend Derrick introduced me to SixLeaf Knives.  After handling and opening the knife, the question, "Where did you buy that cutie?" was not politeness.  I really wanted one.

Actually, I ended up buying three!

He found it on eBay.  You have to win your auction, and SixLeaf will ship you one from Yangjiang, China.  Yangjiang, I am told, is moderately famous for making knives, scissors, swords — anything that cuts.

I won my auction, and despite the warning of how long it could take (46 business days!), it arrived in a couple weeks.  I liked it so much that I bid and won a second one.  It arrived just as quickly.

Prices can vary because you're bidding against someone who thinks they want it more than you. 

Let’s take a look at it.  The matte blade is 3.25 inches long and 0.125 inches thick at the spine.  The blade is a drop point with, for all practical purposes, a flat grind.  The steel is D2, hardened to Rockwell C 60.

Good looking knives.

I like D2 steel.  It is seeing a resurgence in the knife world.  It’s almost stainless, so it takes a little care to prevent rust formation.

The 4-inch handle is titanium with linen Micarta scales.  This keeps the weight of the knife under 2.9 ounces.  The lock mechanism is a frame lock, and to compensate for titanium's softness, a small steel insert makes contact with the back of the steel blade.

The knife is designed to open with a flipper, and the blade flies open on KVT ceramic ball bearings.  These are used by companies like ZT and others. 

A 3.25 inch blade is, for most parts, a perfect size for EDC.

Is it perfect?

No.  The clip isn't reversible.  The knife arrives set up for right-hand, tip-up carry.  That's my preferred carry mode, but it is not a universal standard. 

Closed, there is a little height difference where the frame lock meets the frame.  Just enough of a difference you can feel it when you rub your thumb over it. 

The frame lock engages very nice, with quite a bit of contact with back of the blade

And if I’m picky enough, I would point out that when open, the frame lock separates slightly from the Micarta scales.

I like the linen Micarta scales.  They look and feel nice.

Frankly, for an under $50 knife (It's an auction.  Your price may differ.) you can't beat a SixLeaf.  I like them so much, I gave my wife one!