A Retail Find

  Every once in a while, I impulse buy.  The other day, I saw a blister pack for True Utility Knives made by/sold by Alliance Consumer Group.  The knife kit donates a dollar to DAV for every kit sold.  DAV stands for Disabled American Veterans; more on them later.  The kit has a waterproof case, a dog tag bottle opener, a knife, and mini-tool.  You might be able to sell me an empty box to help veterans so it came home with me.

The dog tag is a bottle opener with a short ball chain.  Since I can be a sissy even with twist-off caps, that's welcome. 

Bottle Opener/ Dog Tag

The mini-tool is, well, let’s just say having a tool is better than having no tool.  The mini-blade is sharp enough to casually cut me. 

Didn't even know I cut myself

The scissors are spring-loaded to open and cut paper and the occasional thread.  I'm trying to figure out what to make of the curved hook blade.  Is it for cutting line?  Opening seams?  I'm sure I'll find a use sooner or later.

Mini-tool

A bottle opener is built into the handle, and I've already given it a test spin around the bar.  It opens beer bottles just fine!

Closed, the knife is 4.25 inches long.  The 2.9-inch blade is flipper-activated and made from 7CR17MOV stainless steel.  This is a fortified version of 440A.  The fortification?  Vanadium.  Here's the meat of the steel analysis:

Carbon 0.6-0.7%,  Chromium 16-17%,  Molybdenum  0.5-0.6%, Vanadium 0.1% or less.  There’s a smattering of trace elements.

Not a bad little knife for what it is

7CR17MOV has been described as good steel with acceptable edge retention for the price.  Not exactly a ringing endorsement, but isn’t that what most good products give us?  Acceptable performance for the money.

The blade is a straight-back pattern with a high saber grind.  A slight false edge gives the blade a finished look.  There's no opening stud or nail nick.  While you can pinch the blade out, you'll find the flipper works very well.  I didn’t find any burs, misalignments, or other quality issues.

The blade is as sharp as I want right out of the box.  I thought about trying to touch it up, but it's a good edge just as it comes.

The blade rides between two brass spacers, and I'm adding a drop of oil on each.  The clip isn't reversible but is set up for tip-up right-hand carry.  Impressively, the knife uses two steel liners to give the knife strength.  The metal lanyard hole is well done as well.

Brown polymer grips complete the knife.

The Kit

I see this knife as a working man's friend.  You could use it to score sheetrock, but there are much better products for that.  It will sharpen a pencil, cut open a blister pack open packing boxes and, most importantly, it is a great knife to lend that moocher who either fails to return anything or breaks it.

I may trim a little of the foam out of the water-tight box and store the knife and mini-tool with a flashlight in the back of my truck.  You never know.

But you can know about DAV.  According to Charity Navigator, they are a 501(c)(4) charity with a four-star rating.  They report DAV uses 85% of their income to help veterans. 

It's one thing to help with hospitalization, rehab, or prosthesis fitting, but they still have to reenter the world.  But when some vets walk out the door, they walk the wire alone.  All too often, they need help getting to the doctors, filing paperwork, and rejoining society.

DAV has provided 19 million rides to medical appointments, submitted 12 million claims for assistance for vets, and has helped over 168,000 vets find jobs. 

Knife, mini-pliers and a bottle opener What more do you want?

Oh, hell, it seems my computer screen is blowing dust in my eyes again.

 

Three to Go

I just picked up a little hawkbill folder called the Isonzo from MKM and it’s pretty cool.

MKM stands for Maniago Knife Makers a consortium of knife makers in Italy.  I followed the Google links and ended up at CONSORZIO COLTELLINAI MANIAGO.  They are a group of 46 small cutlery companies all located in Maniago Knife District.  They have been in the market worldwide since 1960. The company is headquartered in Maniago itself, around 70 miles from Venice.

The Isonzo was designed by Jesper Voxnaes, a custom knife maker out of Denmark.  Italian laws are different and businesses can be organized differently.  This 'brand' is a collection of four of the top knife manufacturers in Italy working together to consolidate and strengthen their commercial contributions to foreign markets.  I suspect this allows each company to use excess capacity to their advantage in foreign markets.

The knife sports an aluminum spacer you can use as an oversized lanyard hole.  This is always an excellent idea working over water or deep snow.  The short 2.25 inch blade is made from Bohler N690 stainless steel and has a jimped thumb ramp for precise control.   The blade smoothly rotates open on ball bearings.

Bohler N690 is a high carbon martensitic stainless steel.  The vanadium (V) forms incredibly hard and fine carbides that pin iron grain boundaries in place and resist deformation, increasing the steel’s strength.

C          Si         Mn      Cr        Mo      V         Co

1.08   0.40       0.40   17.30     1.10    0.10     1.50

You can open the Isonzo with either the flipper or the elongated thumb hole.  The blade is locked open with a secure stainless steel liner lock.  It opens with an elongated thumb slot or compact flipper tab and is secured with steel liners in the grip. The non-slip handle is made from synthetic fiberglass reinforced nylon with a textured surface and an ergonomic shape, offering a secure grip even when wet.

The closed knife is carried tip up and the wire clip is reversible for left or right-hand carry.  All in all it is a sweet knife.   The Isonzo comes in a variety of blade shapes serrations and handle color, but I’m excited about the increased cutting power of a hawk nose blade and the blue color.

The suggested retail price is $99 but most manufacturers have a MAP or minimum advertised price.  You can find this knife on “sale” for $85.00. 

https://www.knifecenter.com/series/mkm-maniago-knife-makers/mkm-isonzo-folding-knife

Ash Viper Stockman 

This is part of Roper’s knife line dedicated to rough stock rodeo events.  Ask any cowboy, these events involving bucking bulls and horses and you need a strong grip to take the ride.  The Ash Viper sports a rough saw cut handle, stainless steel bolsters and a D2 blade.  Drop one in your pocket and you can almost feel the cowboy in you.  (The over sleeve says 1065 carbon steel, but the website says D2.  Go with the website.  The over sleeve is generic.)

Roper Knives is one of several brands owned by the American Buffalo Knife and Tool Company, a family owned company out of Sweetwater, TN.  While hardness isn’t mentioned, I suspect they have an RHc of around 56 to 58. 

The handle is sawcut G10 and houses a 3-inch clip point, 2inch spey blade and 2.25 inch sheepsfoot blade .  The liner is brass. 

D2 steel is a high carbon, high chromium tool steel with extremely high wear resisting properties. The high percentage of chromium gives it mild corrosion-resisting properties so a wipe with food friendly oil is a great idea.

I like the feel and the weight of the knife.  I’ve seen Roper in high end catalogs and in fine stores.  If you like stockman patterns and you like slip joints you’ll like this knife.  You can find it for $24.00

https://www.knifecountryusa.com/store/product/228408.228413/roper-0001cbr-ash-viper-stockman.html

 

Rough Ryder Knives is celebrating its 25th anniversary this year. And they have changed their name from Rider to Ryder.  It may have something to do with the condom brand Roughrider or not, I’ve always wondered.  For their 25th anniversary they have picked up their game and I’m impressed with the quality of the knives.  Will they keep this quality?  I don’t know.  But I’d buy while they are available.

Yes, they are made in China, the home of the coronavirus.  I'm not concerned with the politics of off shore production or the evils of communist China. If these are your reasons not to buy Rough Ryder then nothing I could say will change your mind.  I will say I find the quality and appearance amazing for $22.00

The trapper style knife has a reverse frosted clip point blade and polished spey blade.  Both are 3.12 inches long and are separated by a brass liner.  The bolster, as well as the pins and shield, are nickel.  The closed knife is 4.12 inches long and I really like the ram’s horn scales.

The blade is listed as 440A stainless steel.  That’s a little of a disappointment, but don’t let that stop you.  440A is a high carbon martensitic stainless steel that possesses good strength, moderate corrosion resistance, and excellent hardness and wear resistance.

The typical chemical composition is

C  0.6 – 0.75%

Cr  16-18%

Si  1%

Mn  1%

You can find it at https://www.smkw.com/rough-ryder-rams-horn-trapper with a great price.