Cleaved!

 

I just got CRKT’s newest Minimalist, the Cleaver.

CTKT's newest Minimalist, the Cleaver

You might think of it as a neck axe, but I think of it as a planing edge.  It weighs only 1.7 ounces.  Too light to actually chop, too small to generate swinging energy, but the 2.3 inch long edge can make clean slices and the cleaver head allows you grasp the handle front end for….

Okay, it’s a bit of a toy.  But it is still a very icey toy.  CRKT makes quality knives.  They are, dollar for dollar the best buy in any price range.  As with the other six Minimalist the finger grooves fit a surprisingly wide range of hands.

The blade is made from 5Cr15MOV and the elemental break down is:

Carbon - 0.45-0.50%

Chromium – 14.75%

Molybdenum – 0.68%

Vanadium – 0.10%

Manganese – 0.45%

This China’s equivalent of the German X50CrMoV15 steel, one of the most popular kitchen knife steels in mainstream German knives.  I’ve got to admit the sprinkle of vanadium, which forms very fine and hard carbides, ups the quality of this steel.

It has a Rockwell ‘C’ hardness of 55 to 57.  This should be relatively easy to resharpen on an ordinary stone and still hold an edge.  I will not be the first to tell you, always resharpen when you think it is getting dull, not when it is dull.

Like All Minimalist it comes with a neck sheath

CRKT calls this Minimalist “…high-carbon stainless steel cleaver (that) … safely rips through food packets or clothing thanks to the false front edge. The hole in the blade pays homage to the hanging hold on the old style kitchen cleavers.”  Well, they have to say something!

It is clear that CRKT and my definition of high carbon steel are different.  440A contains 1.1% carbon.  That’s in the high carbon steel range.

It’s made in China and as I said before it’s almost a toy, unless you need an edge.  When you need an edge, well, you work with what you have.  With the sheath you can drop the Cleaver in a pocket, duct tape inside your first aid kit, wear it under your shirt and it will be available if you need it.

Back Side

It would not be my first choice going off the pavement, but I always remember the end of the Tom Hanks movie “Cast Away” when he holds up a Swiss army key chain knife and mutters that everything would have been so much simpler with that knife.

You can find one for yourself under $40 at:  https://www.crkt.com/minimalist-cleaver.html

 

 

 

 

Switchblade or Automatic

Do you say ‘switchblade’ or ‘automatic knife’?

Sounds like a George Carlin question.  Switchblade is warm and fuzzy.  Automatic is hard and cold.

To me, this is what I consider a switchblade.  It’s a classic Italian stiletto.  It clicks open with a menacing double click.

A classic switchblade what would be carried by the Jets or the Sharks.

This is not an expensive one; I couldn’t find a maker’s mark.  The blade is stamped “rust free” so I assume it’s stainless steel and is too dull to even cleanly open envelopes.  I remember when knives came relatively dull and you put the kind of edge you wanted.  But I don’t want to sharpen it and alter the ‘factory edge’.  It has the classic release button which allows a leaf spring to fire the knife open, a slide safety and a horn handle.  I got it as part of an estate I purchased and kept it because the knife was unlocked by depressing a tab on the knife’s butt. 

But say automatic to me and I got to go with Pro-Tech knives. 

Pro-Tech Knives, LLC is a family knife company owned and founded by Dave Wattenberg.  They have been building high quality American Made knives since 1998.

Pro-Tech produces about 12,000 knives per year and its most famous models are the Godfather, Godson, and the Runt J4.  You’ll see Pro-Techs in the hands of the U.S. Military and law enforcement including the Secret Service and US Marshall's Service.  You’ll also see them in the hands of collectors and anyone demanding high performance from an automatic knife.

(Hint:  Get yourself a collaboration between Pro-Tech and Boker.  It’s a sweet little auto. You will not be disappointed!)

I’ve always wanted a Godfather.  Not any of the variations.  I wanted the Tuxedo.  For years I watched the one with an actual Ivory insert.  But then, when we were still relatively ivory friendly, it was out of my price range.  But the ivory micarta, that was just too powerful of a call.  I went with the black blade to compliment the black and white motif.  I can’t help but think of Dino, Sammy, Frankie and the rest of the Las Vegas rat pack when I see it open.

Pro Tech 's Godfather It's pissy eligant!

It’s a big knife.  Take it down a step and you’ll see the Godson and I found one I liked. Same good lines but I went with Bruce Shaw’s Steampunk copper insert. 

Steampunk?  It is a visited reality in which Jules Verne’s world still exists.  It just matured a little and discovered sexy.

If you needed to cut the mooring line a dirigible and escape in your velociped, this is the knife you need 

Shaw received his art training at Cal-State University at Los Angeles and graduated as a mechanical engineer, and what could be a better background for Steampunk?  He started engraving in 1978 and has been engraving full time since 1984.  The copper plate features engravings of gears and mechanisms of a mechanical watch some of which drive one of his classic skulls.  It was a limited edition and I was just lucky enough to be in the right place.

If you think of the Godfather and Godson as part of a family of knives, then the limited production of their Rockeye Auto PK custom has to be the hippy uncle from the LSD 70s.

Dude, it's time for the Airplane on next!  They follow Cream.

The Rockeye line was designed by Les George.  Les started making knives in 1992 and found a kindred soul in master builder Stan Fujisaka of Kaneohe, Hawaii to show him the ropes.  Sadly, Stan passed away on New Year’s Eve just a few hours before the arrival of the new 2014.  One has to wonder what kind of knife shows they must have in the afterlife. 

Having served in the Marines with a wide variety of jobs, Les has developed well-defined ideas about what how knives and tools should be made for use.  You can see this in the strong blade and handle of the Rockeye line.

The handle was anodized by Peter Kellett, who may be best known for his unique, one of a kind art of amazing designs of metal guitars and Pro-Tech knives.  I was told, but can’t confirm, that only four, maybe eight of these knives were made and again I was at the right place.

If you had a cousin knife from the Deep South, maybe New Orleans or the swamps of Florida, it would be the TR-3 Alligator.  The Tactical Response 3 is a favorite with law enforcement and military.  They are hardworking knives with a 3.5 inch blade, an automatic knife that is slender and fits nicely in the pocket.  But I can almost guarantee none of them are carrying the TR-3 purple alligator.  Artist Peter Kellett returns to marry a purple alligator and a mother of pearl release button to a tactical knife. 

I hear to tell chicken taste like gator.  Where can I get me some?  

I like the style of Pro-Tech knives.  I especially like their custom or ‘arty knives’.  You can go to their website (http://www.protechknives.com/product-category/automatic/) and find some amazing knives.  How about a left-handled Godson in basic black?

Doctor, Doctor!

 

What knife do you carry during the Covid-19 pandemic?

There are a lot of options to choose from.  I’m going with Steel Will’s Plague Doctor!

The Plague Doctor is a tactical level knife from Steel Will

Steel Will offers three levels of pocket knives.  First is their EDC.  Up a notch is their Outdoor line followed by their Tactical line.  I don’t know the difference.  I’m cynical enough to know “Tactical” products are usually black and cost more.

The Plague Doctor is a product of the fertile mind of the mysterious designer Vaeringi.  At least he is mysterious to me.  I was unable to find a first name or any kind of bio. 

The knife is a frame lock, with G-10 scales available in OD green and black.  I went with green G-10.

Who says photos don't lie?  The lighting conditions produced a black blade and not the silver satin steel blade it should be.

The blade is made from D2 steel, a high carbon, high chromium die steel and is the highest carbon alloy tool and die steel in production.  The steel contains 1.5% carbon, 12% chromium, 0.75% molybdenum and 0.9% vanadium and a smattering of other elements.  It is the chromium and vanadium that is of interest.  Both form hard, tiny carbides that pin the grain boundaries, and provide strength and edge retention.  The chromium forms a thin, tough transparent metal oxide that protects the steel from rust.  D2 is right on the edge of being stainless, so it benefits from an occasional wipe with oil.  D2 was popularized by Jimmy Lile and later by Bob Dozier.

The knife blade sports a flipper that rotates to form a deep guard for the index finger.  The top of the blade has a riser with jimping providing a friction surface for your thumb.  A depression in the handle feeds your thumb into the jimping. 

There is no opening stud on the blade.  This knife was designed to open with the flipper.  Not enough of the closed blade is exposed to grasp it and open the knife slowly and politely.  Politeness be damned, it’s a fighting knife.

The clip is reversible, but not interchangeable.  Steel Will gives you a second Clip.  All you need is a T-6 torx and a drop of loctite.

I went with the OD green because it wasn’t black.  There is a fine texture on the G-10 to help with grip but not so much you’ll sand the inside of your pocket.  Steel liners support the scales and one side forms the liner lock.  The lock takes a pretty solid bite out of the back of the blade.  The blade pivots on what appear to be bronze washers.  I’d put tiny drop oil on them too.

Let’s summarize the knife specs:

• Blade Length: 3.43" with a cutting edge that’s 3.54"
• Closed Length: 4.96"
• Overall Length: 8.31"
• Blade Material: D2 Tool Steel
• Blade Thickness: 0.14"
• Blade Style: Drop Point flat grind
• Handle Material: OD Green G10
• Handle Thickness: 0.51"
• Weight: 5.4 oz.

The liner lock engages its full thickness on the back of the blade.  The steel liners make this a solid knife!

You can get you own Steel Will Plague Doctor for just under $80.00 at

https://steelwillknives.com/our-knives/tactical-series/plague-doctor-f16m-02.html

It’s a lot of knife for a reasonable price.

Steel Will is a division of Sports Manufacturing Group (SMG), an American company located in Huntington Valley, PA.  The knife was manufactured in China and despite my feelings about China due to the Covid-19 pandemic, it is a quality knife.  I would have no trouble carrying this to a knife club meeting or taking it off the pavement. 

Boker's Pocket Knife

Mickey Yurco is an interesting fellow.  He’s been making knives for a number of years and has a number of unique concepts.  His current creation is a fixed blade knife he and Boker Knife call The Pocket Knife. 

Mickey's fixed blade "The Pocket Knife"

The first thing you notice when you open the box is the graceful saber grind drop point blade tapering to a point.  The egg-shaped handle is depressed by about 26 degrees from the center blade line.  More on that later.  The handle also sports a cutout that accommodates your index finger.  The egg-shaped handle is constructed of black G-10 and has a slight palm swell making it easy to grip the knife.  The upshot of this design is a knife that locks into your hand and the allows your wrist to be at its neutral position where you have the most strength and control of the knife.

Clearly it was a designed for a purpose. 

Let’s look at the specs, shall we?

The knife is made from 440C stainless steel.  The blade is 3.3 inches long with a 0.15 inch thickness and overall length of 6.8 inches.  The finger groove acts as a stop to keep your hand off the sharp edge.  The bend also helps to keep the knife from slipping forward or backward in your hand by converting either motion to a push into your palm or a press into your closed hand.  A large lanyard hole is available, always a good idea when working over water or deep snow.  

The knife seems to want to nessle deep into the palm of my hand

440C isn’t a super steel.  But it is the best of all the 440 steels.  It is also the steel everyone compares their newest steel to.  Frankly a well-made, well-tempered knife of 440C will give you all the performance the majority of us will ever need.

No discussion of steel is complete without a formula sheet:

440C contains:

• 0.95-1.2% carbon
• 16-18% chromium, 
• 0.75 molybdenum,
• 1.0 manganese and
• 1.0 silicon.

 This formulation provides high strength, moderate corrosion resistance and good edge retention.  Some of the chromium and carbon form tiny carbides on the grain boundary.  Iron also can form carbides, but they are not as effective as chromium carbide.  These grains are very hard and resist the shear needed to displace the steel grains.  This is what gives steel its strength.

The remaining chromium forms a transparent thin film of chrome oxide that limits rust making the steel discolor or stain less.  Still an occasion drop of food grade oil is always a good idea.

The results of this chemistry and heat treatment gives The Pocket Knife a Rockwell hardness c scale of 57-58. 

The sheath is made from strong light weight kydex

The sheath is fabricated out of kydex and sports what I think is a unique attachment device, the Ulticlip.  This clip allows you to fasten a variety of holsters and sheaths to pants without a belt.  The sheath slips into your pocket and locks on to the edge and provides a secure platform to draw the knife.  The knife sheath is designed so you can set it up for left or right pocket carry.  Mine arrived set up for left side.  I may leave it that way.

The Ulticlip is relatively new but quickly becoming a go-to solution for anchoring whatnots

The way back story.

Mickey has been seriously studying martial arts since the early 70s.  By 2000 he became interested in knife combatives as taught in Martial Blade Concepts.  Despite being in law enforcement, Mickey realized that even with CCW not everyone can carry a firearm, but most of us can carry a knife.  Mike Janich has developed an evolving concept of using a small legal knife for self-defense.  These concepts were attractive to Mickey and evolved into “The Pocket Knife.”  I’ll let Mickey tell you about it.

The wrist is in the neutral position and aligned with the long bones of the arm for maximum strength. 

“It was designed to be carried to the far right (just like my politics) of the front right pocket.  A fixed blade can be drawn and deployed faster than a folding knife.  Picture a normal stance with your thumbs in your pockets.  Your hand is now on the knife handle.  It is an inconspicuous way to quickly unsheath the knife. The small egg shaped handle fills the air pocket in the palm allowing a good grip.  The small handle also stays out of the way when not in use. This little blade is also a great shape for everyday mundane tasks from opening mail to cutting a steak at the Outback.  An email I received from Boker stated that it was a popular knife at a German Knife show.  I am pleased with their interpretation of my knife.”

I thought the knife needed to be a little lower in my pocket, so I moved the clip up one notch.  I like it lower in the pocket.  Yes, I will probably scratch the G-10 handle, but as I see it as a tool, I’m okay with that.

Sharp out of the box

I also did a little cutting with mine.  Cut a little rope, reduced cardboard to smaller pieces shaved a little wood.  I think it would make a great pork chop knife.  I’d take it for a walk off the concrete, for weekend at a cabin, or just simply heading out.

I think it’s a pretty cool knife.  Spend 5 minutes with Mickey and you’ll see how dangerous a knife can be in trained hand.  But even I know, that going up against someone with a couple inches of sharpened steel in their hand makes most people think twice.

You can get one for yourself for $60.00 at Boker.  Just follow the link: https://www.bokerusa.com/pocket-knife-02bo522

You can also find the Ulticlip to modify your current holsters, sheaths and whatnots at: https://www.ulticlip.com/?v=7516fd43adaa