Sheep Skinner

My friend Derrick has been working with knives and airguns for some time.  He has become quite expert at building, repairing and refinishing these big boy toys.  Frankly, more and more women are admitting to an interest in knives and what's not to love about a gun you can safely shoot in your basement all winter long.  This is an email he sent me and I got his permission to publish it on my blog.  I really enjoy his work and I wanted to share it with you.  

I'm having a little trouble with most of the images, but life is an adventure so here goes!!!

I've had this Russell sheep skinner blade for almost a year and finally found both the time and the inclination to move forward.  

Got it from Jantz Supply.  I liked the shape and found it vaguely reminiscent of the Grohmann pattern Canadian knives.   It's not like I want to skin a sheep.   As it comes, there's no actual point.  It's rounded and the point is completely unsharpened.  The rest of the blade was honed to shave.  I'm not sure how to describe the polish on the blade.  Crocus cloth maybe?  Kinda wavy.  I like it.  It's a high carbon steel.  Probably 1095.  After re-drilling a handle pin hole and filing 10 thumb notches in the back of the blade, it's gotta be in the upper 50's on the Rockwell hardness scale.  I reshaped the blade to create a point and slimmed down the handle.  Reshaping the handle resulted in the rear pin hole being off the centerline.  The new hole location was going to overlap the existing hole slightly, so I filled the hole with a tiny stub of steel rod, staked it in place, then ground it flush.  Spot annealed with a torch for the new hole and through drilled.

Since I still had some green canvas micarta from the Gerber project, I elected to just use it up.  If Woodcraft was closer...  Some areas of the tang still need some final polishing to remove all the tool marks.  Filing the thumb notches was a bitch.  I didn't bother to measure or mark them--just did it by eye with a needle file.  A diamond needle file would've been a luxury.  So, now it'll need a sheath.  I think the kydex is a no go this time around and I'd like to try to make a leather sheath.  Try to scrounge up some 8 oz. saddle leather locally.  Pat Catan's maybe?  Here's the pics of the knife.  I figure it's 90--95% finished.

China Knives and AG Russell

Had an interesting event at the April meeting of the WRCA knife club.

Call to order and a reading of the minutes

One of the officers stood up and showed off two very nice AG Russell knives he just purchased. 

No clip, no stud, no lock, but it felt very good in my hand.

He claims each knife was under $50 online.  The interesting thing was both were made in China.  I took a close look at the knives.  The finish was first rate, the handles and bolsters met nicely and I couldn’t feel any separation or mis-alignment.  They were very well made knives!

 

I really like the wharncliffe blade. And its nail nick is on the other side so you don't have to fight with the drop point blade to open it.  I see a lot of American knives without that feature. 

I really like the knives and that’s odd for me.  Very odd.  Neither knife locked open nor did they have a pocket clip.  And they both used nail nicks to open the blades.  This makes these knives totally un-natural for me.  But you know, if the blade locked open, I’d carry them.  I’d give up the clip and one-handed opening.  That’s how nice they were.

Many people at the meeting felt that any product made in China was junk.  I see that perception at my knife table at the shows.  But it’s not so.  AG Russell doesn’t sell junk.  Spyderco doesn’t make junk, here or elsewhere, nor does Ka-Bar, to name a few. 

True, some companies are bringing some of their lines back to the USA. I suspect this has two causes.  One, they didn’t have enough oversight watching production and quality slipped.  The second reason and perhaps the hardest to remedy, too much of their customer based is rooted in the equation:

China = Junk

I don’t think that equation is unconditionally valid.  I think quality companies can produce a quality knife in China if they choose to.  Of course, one should expect a relationship between cost and quality. 

 

A $2 dollar knife made in China or the US will be junk.  

A $30 knife made in China by a quality company will not be equal to the quality of a $150 knife made by the same company in the US, Germany or Japan.  It will match and perhaps exceed a $30 knife made anywhere else.  

I advise my customers to buy quality in relation to their needs.  Your 11-year old son in Scouts doesn’t need an $80 Benchmade, but a $27 CRKT might just be the perfect starting place. 

A three-month trapping expedition to Alaska merits a TOPS fixed blade knife and maybe several SOG or Cold Steel folders.  Scrimping on price and quality here could be disastrous!

So, who are the people opposed to quality Chinese knives?  I don’t know.  I suspect they had problems with a counterfeit product, or bought cheap and found out they only bought trouble.  Perhaps they see the Chinese worker as a direct threat to their employment. 

 

China is far from perfect.  I don’t like their government; I don’t like their economic system and some of their labor practices sound like indentured slavery to me.  But the Chinese want a standard of living approaching ours.  And they know that quality is the way to get there.

These subjects are far above my pay grade, but I suggest to keep an open mind about products and their country of origin.

Dover Knife Show: Part Two

The show?

It was fun.

The hard part is the set up.  The tables are in place when you arrive.  You start setting up, knowing you have a 6 foot table to fit 8 feet of stuff.  You haven’t met your neighbors yet; the customers haven’t arrived yet and soon the vendors will be trading among themselves.  Everyone is excited!

Is this my table?  No!  Well, where the-shut-the-front-door is it?

 Every kind of knife can be found here.  From the used and abused collectibles…

...to the ultra high-end knives made by Master Bladesmiths. 

Interested?  Email Harleypaularocks@yahoo.com

The WRCA club staffs the administrative duties and they go out of their way to help both the vendors and customers.

You say the missing dog has 3 legs, blind in one eye, missing an ear and answers to "Lucky"?

I found a great new knife made by Larry Withrow from Charleston, WV.  Both his leather work and forged blades are incredible.

lwithrow@cebridge.net

The steel is a high carbon 1095 San Mai with a Desert Ironwood handle.  It just caught my eye and I was quick enough to beat out several other buyers. Lady luck smiled on me.

The blade is so slightly hollow ground it takes a straight edge to see it.  Larry tells me the knives are in demand with hunters in the Texarkana region.

Author, new knife and his table.  I've got two folders, one clipped in each pocket.  

How can anyone have enough knives?

One of my favorite people is Joe Kinches, who is the only Ohio Flint Whisperer in existence.  He must be.  What he coaxes out of the flint, which is a flawed, brittle rock, is amazing.

Contact Joe at designsbyjoseph@yahoo.com or go to his website http://www.collectorcabz.com/

His display won Best Display 2012.   I like his work and I think it was well deserved.

Here’s a few pictures of the show.

Sunday mid-morning: plenty of room to shop

What can I say?  The vendors had plenty of time to talk with the customers.

No matter what your taste, collectible knives were available.  Mankind's oldest and perhaps first tool, how you have changed and still stayed the same.

My Favorite Table.   I'd never be embarrassed to be found with these in my pockets.

Two custom knife makers checking out the other vendors

 I’m sorry you missed the show.  The vendors are friendly, helpful and love talking about knives.  You would have enjoyed it.

The Dover Knife Show - 2012 Edition

So, how was the Dover Knife Show?
 

It depends on your definition of success.  My answer is colored by the poor sales most of the vendors (and I) had.  One insider told me the head count for Saturday was 160.  That means the ratio of potential buyers to people behind the tables was anywhere from 2 to 4.  Potential sales depend a lot of foot traffic and a high ratio like 20-50.

It also means on Saturday the most the club could make in gate receipts was $800.  Not so hot considering the work that goes into organizing.

Sunday was worse.  The majority of sales were between vendors.  It’s nice to sell, but it’s kind of like kissing your sister.  It’s a kiss but you’re not getting anywhere.

I didn’t hear of any of the Warther family showing up either and that was a disappointment.  Especially considering it’s the Dale Warther Memorial Knife Show.  It begs the question, is Warther Knife a spent force in the knife community?

Classic Warther Folders No Longer Made

One insider told me that not only has production of Mooney Warther’s fighting knife stopped (Mooney stopped at the end of WWII, but nobody picked it up after he died), but so has production of folders.  There doesn’t seem to be any interest in new steels or increasing the number of knife lines.

“Maybe when the kids graduate from college…” was the most optimistic statement I could find in regard to production or changes.  Maybe.  And just maybe the company will just be treated as a cash cow, you know, leave it alone and milk it.

It’s easy to bitch but difficult to come up with solutions but I’ll try.

It seem that increased foot traffic comes from advertising.  This could be expensive, but there are some things to try:

Put a sign in front of the armory a week before the show.  If that’s prohibited I’d stick a sign in the front lawn the day of the show and plead ignorance if confronted. 

Create a Facebook presence for both WRCA and the show.  I’m old, but social media seems to be the drug of choice of the younger set. 

Get on community calendars on the different medias.  I’d stress the collector and art aspects of knife collecting and pitch it as a public service.

Ask the vendors to advertise their presence at our show on their websites, blogs, tweets and Facebook.  After all, it’s to their advantage to get their fans out to see them.  And what about e-clubs?  All those forums and clubs that have no physical reality other than people on their end of the internet.  Surely we can generate some interest.

I’d collect e-mail addresses from everyone by having free door prizes drawn at the next WRCA meeting, winners to be notified by e-mail.  I’d get the door prizes from the vendors and use the e-mail addresses to blast out updates and reminders about the next show.

The thing to remember is no one person has to be in charge of everything.  Just ask someone to do one small thing like create a Facebook page for the show and help the officers update it.

I bet there are a lot of ideas I haven’t thought of.  I also bet some will work better than we suspect.

Enough of that, what was the show like?

To be continued!!!!

CRKT Box Scores, a Hit and a Miss......

I just received two new knives from Columbia River Knife and Tool and I have mixed feelings about them.

I was very excited about the Fire Spark. 

CRKT's Assisted Opening Fire Spark

It’s a new addition to their black box professional line.  (Gee, I wonder who they are copying.)  I really like the way the knife looks.  Spear point blade with false edge, black blade and outburst opening system which opens the knife with a little thumb pressure.  Very nice indeed.   

Has both the LAWKS and Fire Safe systems.  A nice combination of features.

But then add the Lake and Walker Knife Safety System (LAWKS) which prevents the open knife from unlocking during use and the knife should be a world beater.  The metal handle has a nice G10 insert and is tapped to accept the clip in all four locations, tip up or down and left and right.  I talked to CRKT years ago about doing that on their knives and was stonewalled.  I’m glad to see the change. 

And it's tapped to move the clip to any position.

 

All and all, it’s a good looking knife.

Except it doesn’t open very well.  On my knife, the blade only opens part way.  No, I’m not hampering it with my fingers and I’m giving it enough of an opening shove.  I also don’t like the way the spring rattles in the knife when it’s open.  That’s preferred to rattling when closed, but still knives shouldn’t rattle.

What really has me spooked is it doesn’t match the images on the CRKT website.  Maybe the images are from prototypes.  Maybe there’s been a design change.  Maybe, maybe and maybe….

Nope, it’s going back!

I also got an M21-02GL.  It’s a true left-handed knife.  

It's not just for Lefties, but it's great for them!

With most liner lock knives your right hand thumb pushes the liner lock to the unlocked position and you close the blade.  For lefties their thumb must pull the liner lock over.  That’s not easy, but it’s not impossible; it just takes a little more practice.  This knife has it reversed.  The left thumb pushes it to the unlocked position.

Photoshop sucks at annotating, but it's a left liner lock.

The Auto-LAWKS is located on the left side so the left thumb doesn’t accidentally bump it off as you move the knife around in your grip.  It’s also easier to manipulate with your index finger when closing.

Like all the M16/M21 knives it has the flipper that enables you to open the knife so fast, so easy and efficiently you’ll wonder what’s all the hubbub about automatic knives.  The G-10 scales are textured and give you great grip.  But the knife is set up for only tip down carry.  Bummer.  I guess they haven’t gotten the message after all.

Okay, I’m not a lefty.  My sister is and I remember the bad old days when everyone forced you to be a righty.  She had it pretty hard in school and the world doesn’t make too many products for southpaws.  So I’m very happy to see the possibility of a line of real left-handed knives.  

CRKT's Left-Handed M21 next to my right handed Kasper

It was funny, but not fun, to watch right-handed people try to use this knife.  I practice with my left hand a lot.  I struggled a little.  Maybe the best reason to own this knife is to remind us of tolerance for people who have difficulty doing a task we find easy to master.

If you carry a knife in the left pocket, you might want to check it out.

Losing My Temper

The Dalton gun show this weekend was certainly interesting.  I found several things I was looking for and I lost one I normally keep.

I lost my temper in a big way.  This doesn’t happen very often.  I normally just fume inside, and then vent on my way home or on my blog.  In fact I almost lost it twice at the show.

The first time I had a customer who would not believe me when I told him Camillus was made in China.  He just wouldn’t believe me.  I mean it’s listed on the package and honestly, the quality isn’t the same as compared to when they were made in America.  I can be mistaken about country of origin or type of steel in the blade, but I never lie to a customer.

He almost throws the knife on the floor and tells me:

“This is terrible.  They should be shot!”

Camillus was unable to compete in today’s markets and went out of business.  Somebody bought the name and moved it overseas.  You have to understand, Camillus didn’t ask me (or apparently him) about making knives in China.  I’ve had about all I can take of the automatic response that a knife made in China or anywhere other than the USA is by definition a “crap knife.”

“Let me show you some made-in-the-USA knives,” I said.  “Why don’t you buy an American made knife from an American knife seller?  Maybe if we buy enough American knives we can convince the manufacturers to bring production back to America?”

“I bought enough American knives,” he sniffed and walked away.  I didn’t see any in his translucent plastic bag.  Clearly a near miss on the temper scale!

By the end of the Sunday I went for a walk and bought a few little things I was after.  I returned to find a fellow opening and testing all my Benchmade knives.  He had borrowed a pen from us and was writing the numbers down.  

I’ve seen this before.  It usually means they will go online and search for the best deal.  I’m okay with that.  I usually give them a card and suggest that if they find one, email me and I’ll give them the best quote I can.  They seldom do this, but it is the way of sales.

“You’re going to see if you can find it online?”  I asked.

“No, I’m going to have my buddy, who’s a dealer, order me one.”

So in other words, his buddy doesn’t want to invest his money in buying Benchmade knives so our shopper can try them out and then decide which one he wants.  But it’s okay to come over to my table and check ‘em out and rub my nose in the fact that I cannot possibly make a sale.

I admit I lost it.  Now, Sister Mary used to say bad language was a sign of the illiterate and un-educated.  I agree with her.  I could have said:

“You are clearly are a nasty, pathetic waste of humanity who will certainly die alone and unloved in a hospital for advanced stage syphilitic patients.  And I hope when you get back to your kennel tonight, your mother bites you.”  That would have been the smart thing to say.

Instead I said: "Get the f**k away from my table.  (You should) Eat sh*t and die on your birthday.”

Childish?  Yes.  And I regret it.  I’m still P.O.ed and I know Sister Mary would have been disappointed.

My friend, Scott

His name is Scott.  I’m proud to have him as a friend.  My wife and I met him because our circles of interest include shooting, knives and adventure.  We aren’t drinking-buddy-close but I always looked forward to seeing him at the range and at activities like Camp Perry and knife shows.

I always thought our friendship would grow tighter and I’m still convinced that will happen.

Scott’s on a rough stretch of road now.  This patch looks rougher to me than the others he’s told me about.  

Nobody knows what God’s plan is for any of us.  We don’t know at the time what difference will come from the million trivial decisions we make everyday.  We just put one foot in front of the other and think we know where we are going.  Sometimes we need a little help.

Please keep Scott in your prayers and thoughts.  It doesn’t matter if you don’t know him or me.  It doesn’t matter if you read this today or in ten years.  Your thoughts and actions are known by the ultimate score keeper.

I cast my bread on the waters and trust.  That’s enough.

Knife Show March 3-4 2012

Just a reminder.   We’re coming up on one of the two big Northeast Ohio knife shows.  The Western Reserve Cutlery Association is sponsoring the Dale Warther Memorial Knife Expo on March 3^rd and 4^th at the Dover Armory.  The armory is at 2800 N. Wooster Ave. in Dover, Ohio.  The doors open at 9:00 both days.

Here's a link to a website with a little more information:

http://www.iknifecollector.com/events/the-dale-warther-memorial-knife-expo

Knife shows have a different feel than gun shows.  Everything seems a little more relaxed and everyone has a real interest in knives.  The truth is, I like gun shows, but knife shows have a special place in my heart.  It’s hard to explain, but the vendors and customers seem to have more in common and are friendlier.

You can find a link to the WRCA on my sidebar.

I hope you make it down there.  Parking is free and admission is $5.  I believe the Lions have the food concession.  Here’s a hint:  Come for the knives, but stay for the sausage sandwiches…..  

I’ll see you there…………….

Knife Talk

I just got several new knives in for an upcoming show at the Medina Fairgrounds.  I see each knife as a ship that passes by in the night.  I get to see them and handle them and then they’re gone (at least I hope) to a new home.  They may not be what I would choose to own, but each one has a charm of its own.

Bryan Baker makes a simple peasant knife from high carbon Swedish steel.  Modeled on a popular form from Bavaria in the 1600s, he gives it a modern twist with brass adjustable screws and a polypropylene handle.  The knife is made in New Zealand and based on how knife rights are circling the drain, it’s only a matter of time before some bureaucrat decides it’s too dangerous for the common peasant of 2012.

Simple knife doesn't mean only simple applications!

The 3-inch high carbon steel blade is hand ground with a water cooled stone giving it a convex blade.  Carbon steel always reminds me of flint and fire making.  The pattern is simple and reliable.  The knife is held open by your hand. 

It’s not really an attractive knife, but if I had a hunting lodge or was backpacking up north, it’s the kind of knife I’d want tucked away safe and sound, just in case.

I also got a Benchmade Bone Collector folder.  The photos don’t do it justice.  The blade is made from D2 steel and the green and black micarta handle is deeply grooved.

Benchmade Bone Collector

It’s a little thicker than some, but it’s well proportioned for the size of the blade.  It has Benchmade’s axis lock and I simply love them.  The lock is so easy to use and it helps make Benchmade one of the nicest opening knives on the market.

Most Benchmade's are set up for tip up carry.  This one can also be set up for left or right carry.

If you haven’t held one, do yourself a favor and find one.  I think you’ll like it.  My best friend took a look at it and said, “They sure know how to build a knife!”

So right!

PS: Don’t forget.  The Dale Warther Memorial Knife Expo is coming up March 3^rd and 4^th.  It will be held at the Dover Armory.  Parking is free and admission is $5.  No matter the type of knife, new, collectible, factory tactical, or custom made, you’ll find it there.  It’s one of the few pure knife shows in Northeast Ohio.  I hope you can make it.

Rules of Engagement

Had a chance to talk to two different military men on temporary leave from Afghanistan at the gun show this past weekend.   They didn’t know each other but they each told the same interesting story.

We’ve all heard about rules of engagement.  They define when a person can open fire in a war zone.  The rules are designed to help the military create goodwill with the population.  

Some make good sense:  Only women can search women.  Our police try to follow that rule as well.  Other rules, well, I can only shake my head in confusion.  For example, troops can fire at an insurgent if they catch him placing an IED but not if insurgents are walking away from an area where explosives have been laid.

Given these complex rules, you can imagine many Afghanis know how far they can push it with impunity.  

Traveling in the bazaars or between locations you’re likely going to be confronted.  The Afghans know when you can and can’t shoot, but you don’t know how far they want to take it.  However the rules say nothing about being cut with a knife.

“The sound of a switch blade opening alarms them,” the first told me.  “If you want to protect yourself and not get into a fight carry an auto knife.  They hear it and most of them will back off.”

Worth its weight in gold

The other said the same.  “They come up to you and put their fingers in the muzzle of your machine gun.  They know your limits from the rules of engagement.”  The second man shrugged.  “But take out your Beretta or knife and they’re not so sure.”  He gave me a wolfish grin. “See, the rules don’t say anything about knives.”

So if you’re heading to Afghanistan, get a quality automatic knife to carry with you.  You might want to add a good fixed blade.  A fixed blade will always be faster, surer and stronger, but it’s silent out of the sheath. 

Sub hilt fighter - custom made by Torson

There is nothing like the comforting clack of your auto locking open on a dark night.

Benchmade Auto Rift - doesn't look like an auto, but pull back on the axis lock....

Of course, you’re in harm’s way so you may have to use it.

New Edges and Observations

Speaking of sharpening….

I picked up an Eze-Lap diamond hone for work.  I use a rubber mill knife to cut rubber hoses and belts at work.  Many of these products have Kevlar fabric which can be cut but ruins the knife edge.  My co-worker has been using a cheap ceramic pocket sharpener in which he has ground a flat spot.  The diamond hone works better, but I noticed a “thunk” at the end of the sharpening stroke.  Of course, when you work with microscopes it’s easy to take a look. 

 

I found a small bump at the edge of the hone.  I don’t think it will affect the sharpening, but it gives me the shivers every time I make a stroke.

Eze-Lap coarse with bump at the edge

A new Spyderco has arrived.  It’s the Balance.  The closed knife resembles an equal arm balance, the favorite of classical analytical chemists.  That’s not me, but still it speaks to me.   

Spyderco Balance

Open, it’s a mini- gurkha knife or khukuri.  The knife is less than 3 inches closed and weighs 1.4 ozs.  That’s less than two first class pieces of mail!

 

The handle is carbon fiber and the steel VG-10.  The small clip can be moved to any of the four positions: tip up, tip down and right or left.  

If you look at it and ask what’s it’s for, well sorry, but you’re not a knife person.  Sometimes they are just for the heck of it.  Other times you have a specific need that a knife fills in a specific way.

I had a knife on sale on eBay, a byrd Meadowlark from Santa Fe Stoneworks in spiny oyster.  

byrd knife with Santa Fe Stoneworks spiny oyster grip

 
Somebody got a very good deal, but that’s beside the point.  It didn’t want to sell here so it sold somewhere else.  The thing is, the winning bid came in the last 12 seconds.  Was it sniping software, fast reflexes, or just good timing to get the bid in so late that nobody could counter bid?  

As a seller or buyer, I’m not sure I approve of sniping software.  But if you really want something, bid your maximum in the last 15 minutes.  eBay will auto bid to your max against incoming bids.  You’ll either get it or not at some price including your maximum.  But you will not fall victim to a sniper while trying to get a deal.

Sharp Conversation

After dinner she put down her glass and looked over to me, “How often should I sharpen my knife?”

I looked at her and then over to my wife.  We had just finished dinner and I was sharpening our guest’s pocket knife at the dinner table.  Clearly some sign was needed before I carried on.  I got it.

“If you wait until it’s dull, you’ve waited too long.  It’s always easier to touch up an edge than to bring a dead edge back to life.”  

“What about electric sharpeners?”  She asked a good question and I had half an answer.

“Depends.  Some people press too hard, leave it in contact with the rotating stones too long and heat the blade up too much.  That will damage it.”

There’re really only a few things to remember about tempering and steel.  Tempering is actually a softening step.  The martensite that forms from austenite can make steel so hard as to be unusable.  Tempering allows other softer structures to form and make the steel usable.   Too much tempering, too soft to hold a good edge.  Too hard and the blade snaps too easy.

Almost all the structures that give steel its incredible properties are diffusion based.  Diffusion is driven by time, temperature and moderated by distance.  Heating a knife blade at the thin edge will affect the steel more than heating the spine the same amount.  And the effects of heat cycles are cumulative. 

So how often should you sharpen and how?

I believe you should sharpen when the edge seems to be getting dull.  If you’re butchering a deer you may want to touch the blade up often.  If all you do is cut string and open paper envelopes, you can go a long time.

In the kitchen you should touch up the blade of your chef’s knife before you use it.  The sharpening steel doesn’t sharpen the edge, it draws the wire edge out.  That’s a good thing, as the wire edge is the really the source of sharpness.

You’ll find it easier to keep a sharp knife sharper than resharpen a dull knife.  And I learned that the hard way.

Last summer was a time for “trench warfare.”  I was running underground cable to my soon-to-be-built garage.  After it was up I got a lot of help from my friend Rick with wiring the garage.  With all the cutting and trimming my favorite work knife, a CRKT Crawford Kasper folder, became very dull.

How dull?

So dull it refused to cut anything.

I could have taken it to a professional sharpener and had it re-edged, but as penance and hard luck lesson, I resharpened it myself with my Spyderco sharpener. 

Spyderco Sharpmaker

 I’m still working on it.  I get it sharp, but as soon as I need it for some job it slides toward dull.  I haven’t been able to spend enough time to push it from sharp to very sharp, which is where I prefer my knives.

I also use the Lansky system.  The ability to hold each progressively finer grit stones at the same angle is a gift from the knife gods.   

Lansky system

The downside: it’s a lot of work to set up properly just for a little touch up.

Benchstones. I’ve got more than a few.  The key to good benchstone sharpening is reproducibility and cleanliness.

Gunk up the natural pores in the stone and it will not sharpen.  So use a good oil and clean it off when you’re done.

Holding the knife edge to the same angle through each stroke is critical for a sharp edge.  We can all get better at it, but some people are gifted at it.  I’m not one of them.

Years ago I bought a Buck Honemaster to help me sharpen my knives.  

Buck Honemaster  

You can see a dull strip of metal towards the edge sitting on the wood.  That's metal wear from sharpening blades.

 It clamps on your blade and holds it at the angle you select.  The angle isn’t very reproducible between sharpenings, but you can get a fine edge with it.  Of course, as you wear metal from the knife edge, you wear metal from the Honemaster.   It’s a strange sensation knowing you’re destroying the means of making a great edge while you’re making a great edge. 

Buck Honemaster holding my Commando Cutlery on the fine side of a benchstone

On the whole, sharpen your knives before they get dull.  They’ll work better, faster and easier.  A sharp knife reflects well on its owner.

Christmas Knives

Christmas knives are often new, exciting slivers of steel and polymer (yes, Virginia, unless you have stone or bone handles, it’s a polymer) that catch our attention for a few moments around the tree. 

“Oh! Helen,” he said, over the sound of wrapping paper being shredded.  “It’s a hand-made tactical friction folder from Frantic Forge!  It’s just what I wanted.”

Her comeback was not entirely unexpected.

“Oh, John!” She managed to be heard over the kitchen timer and the sound of bubbling pots.  “It’s just what I wanted!  A hand-made bread knife combination turnip carver from Kitchen Dungeon Forge.”

This scene is played out in front of Hanukkah candles and Christmas trees all around the world.  Trust me, I’ve had a few of these moments myself.

While we’re lost in admiration of our newest knives, there’s a few knives from Christmas past still hanging around.  If, like Marley, I’m forced to drag a chain of knives with me through the next world, I hope these are attached.

Electric carving knives, one of mankind's most enduring inventions

That’s my brother-in-law carving a turkey.  He’s mastered the art of carving a bird.  When I try that my results look like I used a hammer.  I always enjoy watching him make short work of a bird.

If I had one knife to symbolize family and friends it would be a knife like this.

What would a holiday be without family and friends?  I’m sure countless men and women in our armed forces could tell us from past experience.  It makes my eyes water when I think of all of them overseas, so far from family and friends with only their comrades near.  It’s an imperfect world, but I believe the Man Upstairs has a special mark by each of their names in His Book of Life. 

God bless and keep ‘em safe.

The Cold Steel bread knife:  good for cutting bread and fighting ninjas

My wife loves to bake bread.  Could there be anything more fundamental to the human condition than bread?  We break bread with friends.  We welcome new members to communities with bread, and we give bread to loved ones departing on long trips.  “I packed you an extra sandwich,” mothers used to say to sons, daughters and husbands when they departed on a journey.  It’s something I miss.

Christmas spirit – the short version

Whether or not you believe in Christ as Redeemer, can there be any question that his message of peace, love, harmony and forgiveness has value for men and women then and now?

Everyday we hear the Siren song of the modern world.  For a few days at Christmas be like Odysseus’ sailors and pour wax in your ears and ignore the material world just a little.  Enjoy the real Christmas values: Peace, Home, Family, Friends, Harmony, Love and Forgiveness.

Merry Christmas to Everyone!