Saturday, June 4, 2022

Blade Show Day Two 2022

 Saturday is the busy day at the Blade Show.  Everyone who couldn’t get Friday free comes today.  The lines to purchase passes and will call seem to stretch to the horizon.  

Knife enthusiasts lining up

I start my day with a class on decorative file work by Kyle Daily.  Kyle is teaching how to do his 5 five favorite patterns.  There is a lot of interest.  

Kyle's Bubbles

Nice file work can kick your crafted knife up a notch or two in price.  The class doesn’t go the way I expect:  I’m looking for more of an introduction to handling the file.   Still, there was a lot to learn.  Line layout of everything in detail is a must, as is using sharp files and dumping them when they go dull. He uses a black epoxy to make his file work pop and it does.  The other ‘students’ wrote down every name, file description, and website Kyle gives them.  Some are hoping the magic is in the tools and not the user.  Others want to avoid reinventing the wheel.  He gave out some scrap samples of steel for those who what to practice.  I have a couple.  You never know….

Then it’s out to the show floor.  There are some amazing knives and others that are works of art.  Gravity knives are hot.  Reate Knives has perhaps the coolest gravity knife on the market. 

Open...



Opening or closing

Balisong flipping knives remain hot for the younger set.  Companies have come into existence dedicated solely to flipping, offering tune-up services and customization.  It is not uncommon to see someone just standing in a corner spinning and flipping a high-tech balisong knife.

Adjusting the butterfly knife so it is goldilocks right for the owner


The show is also the place to people watch.  I’ll have more on that later.  In the meantime, here are a few (snicker) images for you to enjoy.

No Dalmatians were killed in the making of those pants.


Attendance in every aisle


People come to sell the $10.00 knives too!



Pressing hot steel


In case you need to behead a water buffalo

I got a lesson in sharpening at Worksharp


Beats me?





My two classic Italian switchblades from KC Italy


I ended my day with a bushcraft class called “Unique and Advanced Knife Techniques” by Joe Flowers.  Here too I was a little disappointed.  

No Joe is not pictured in these three images


The PowerPoint presentation he planned to give got lost. The older one we saw was buggy and the video images distant and poor quality.  Joe is machete-centric, so smaller knives were a lesser part of his presentation.  My limited experience is not too many people carry machetes in the woods.  Perhaps we should. 
 
The real Joe Flowers

Joe is an entertaining speaker and arrives carrying at least 30 large knives and machetes.  Perhaps the most important part of the presentation might be to work with safety stops and position the cutting as well as your body so you will not cut yourself if the blade travels farther than you expect.  It is a lesson I learned cutting up tires at GY tire.  Perhaps that’s the most important part of his talk.

One more day to go and then I’ll be forced back to the normal world.


My

Apologies.  It seems 

the software is channeling e.e. cummings

Friday, June 3, 2022

Blade Show 2022 Day One

 The Blade Show 2022 opened with its usual whimper.  Neither Cobb Galleria nor the people from Blade are unable to figure out how to handle the crowds.  The Customer Appreciation Passes were not available until 10 am this morning, and the Show opened to us at 11:00 ~ a LONG line to get in the building and then another line (they called out last name letters alphabetically!) to get the actual badge!  It would have been much simpler if the CAP passes were available Thursday afternoon/evening, then anyone could have picked them up at their convenience.  

This was the line in front of us, and we were 1.5 hours early!

The line standing in the Georgia sun would have been much more manageable.  Still, I was able to pick up my pass and make it to my 10:30 class on Cryo-Quenching.

The class was run by Larrin Thomas, a Ph.D. in metallurgy who works in the automotive industry.  Perhaps more importantly, he is the inventor of MagnaCut, the new hot steel everyone is going crazy over.  

Larrin and carbide grain sizes with SEM

I have a lot of notes, but perhaps the most interesting is the rate of converting austenite into martensite occurs at the speed of sound.  It isn’t a chemical diffusion process, so it also happens at liquid nitrogen temperatures.  After an hour of graphs, images, and explanations, I’m still a little confused.  It reinforced how complex carbide size and location, metal crystal phase, and time is to temper a steel blade.  I’ve said it before, the heart of a knife may be the blade, but the soul is the heat treatment.

Many foreign companies were in attendance this year, Covid restrictions have lessened and countries are allowing overseas travel.  One of my favorite overseas visitors is Grace Horne.  She’s been making scissors for the last couple of years, and she sells out almost instantly.  Fortunately, some of the buyers let her display some of her scissors so you could see them.

Perhaps the most exciting news for me was the release of Rick Hinderer’s new automatic knife, the XM-18.  I’ve waited since April of 2021 for this hot puppy and it is finally here.  Rick is celebrating his 35 years as well. 

Here are a bunch of photos for your consideration.


Hinderer's new auto Just released at Blade Show


Santa Fe Stone Works


CRKT's new SPEC   I really liked the handle!


CRKT's Curfew   The white portion of the handle has an Ivory feel, but it is not


Engraving


Not every knife is what you call practical


This Chili Pepper is coming home with us - by Kizer


Winkler Knives


Italian knives from MKM designed by Jesper Voxnaes





The last two from Grace Horne  Who says scissors are boring?



Saturday, April 16, 2022

Mickey's Knife

 In an effort to get ahead of my summer fitness cycle, I have started walking with a 15 pound backpack.  I chose a single sling pack from Maxpedition with my special attachment, one of Boker’s collaborations with Mickey Yurco.  It is called The Pocket Knife.  The Ulticlip allows you to clip it inside a pocket making it easy to carry and access a fixed blade.

Boker's Pocket Knife on my pack

I like the knife.  The elongated egg-shaped handle is depressed by about 26 degrees from the center blade line.  This allows the knife to be held in a neutral wrist position.  This is perhaps the strongest, most stable position for your wrist when holding a tool.

The blade isn't quite so long, all due to accidental camera angle magic


Two knives held in the same position with my wrist at the neutral angle. The Boker extends outward more aggressively

We are, after all, tool-bearing mammals and a knife is just a tool.

The blade is a graceful saber grind drop point blade tapering to a point made from 440C stainless steel.  It is 3.3 inches long with a 0.15 inch thickness and the overall length of the knife is 6.8 inches. 

The handle is constructed of black G-10 and has a slight palm swell making it easy to grip.  The finger detent in the steel and the palm swell make gripping this knife easy and comfortable.  It is in the running for the easiest and most comfortable using knife I’ve ever owned.

The Kydex sheath

The Kydex sheath secures the knife upside down and close to the body.  I don’t have to worry about bushes or brambles plucking at my knife in an effort to detach it.  The Ulticlip lets me clip the knife on the padded shoulder strap about the middle of my chest.  This is just about where a surprise or fear reaction instinctually brings the hands to.  The clip allows almost instant removal should I need to move the knife and sheath to a different location.

Why a knife?  Because sometimes I can’t get to a firearm fast enough.  If I had a dime for everyone who told me they would simply draw their blaster and shoot their knife/club attacker I would be a rich man.  While a subject for a different blog, attacks are usually done by surprise, without warning, and with a high level of violence.  Awareness is the key to survival, followed by having a tool and skill with the tool.


The Ulticlip allows you to move the knife and sheath from location to location quickly.  

If you are not familiar with Boker, or only think of the lower spectrum of their knives, think again.  Boker makes some very high and middle-level knives at reasonable prices and excellent quality.   Mickey has at least two knives in the Boker catalog.  I find the Yurco Pocket Knife one of my favorites.

Wednesday, February 2, 2022

Magic!

I recently picked up a Boker Joule. The name interested me. A Joule is a unit of energy or work. What’s a Joule, you ask? It’s the classical physics definition of the work you do when you lift a medium-size apple one meter off the ground. In other words not much. That’s not true of this knife.


Boker Joule



The design is by Michael Reinhold, whose designs are seen in several high-end companies like Boker and Spyderco. Michael is a part-time knife designer set up in Crooked Lake, Indiana. He started making knives from old circular saw blades and fell in love with bladesmithing. 

The 2.4-inch D-2 blade is a flat-grind Wharncliffe blade. The blade sports Michael’s maker’s mark, a stylized hummingbird. Why a hummingbird? I don’t know. Perhaps the mark doesn’t know the words. 

The handle is black G-10 and stainless steel. I like the reinforced lanyard hole and the frame lock. And that’s where the problem lies with my knife. My Joule doesn’t always lock open. It’s not uncommon. The tolerances required to allow the frame lock to come about halfway across the width of the tang square end are tight. Many knives require you to open the blade forcefully so the blade flexes slightly past the fully open position. This allows the frame or liner lock to fully engage.

I'm pointing to the partially engaged frame lock

 I could have sent the knife back, but I always need something to blog about, so let’s try fixing it ourselves. 

 I took the clip off to get it out of my way, removed the pivot screw, and then… It was at that point I noticed the knife was working perfectly. The frame lock slipped nicely across the square tang end like it was designed to. 

Fixed!?!



What could I do? 

I put the Joule back together and called it a day. All I can say is it must have been some tension distortion I relieved when I removed that screw. 

It’s a nice knife. The removable clip lets me carry it the way I like to, tip-up in the right pocket. You might want to get one for yourself. It’s a nice urban/office/going-to-church knife. Boker has it for $59.95, but you can search around and find a better price.

Tuesday, January 11, 2022

Doctor, Doctor

I'm a big fan of doctor or physician knives.  They usually come with a spear point blade and a spatula.  The knife butt, on the best of them, is a solid flat end cap used to grind medications and materials.  There was a time when doctors would make house calls, especially in the more remote parts of the country.  Sometimes they need to open their black bag and formulate medication by absorbing a liquid into a solid and solids to ointments.  This called for a spatula and a way of grinding materials.  Hence the doctor’s knife. 


Rough Ryder's Doctor Knife

“…this was entirely done by hand. The pill mass was rolled into the form of a cylinder, placed on a graduated tile and divided by means of a spatula into measured lengths calculated to contain the required amount of active ingredients. These were then rounded between finger and thumb to give the final product.”  Hong Kong Medical Journal 2015.

Of course, the blade was needed to lance boils and carbuncles.  Medicine in the early 1900s was not for the faint of heart.

I’ve always been fascinated with spatulas.  As a chemist, I used a variety of sizes to weigh out chemicals and unknowns.  Then I turn around and see a chocolate maker use the same tool.  Take a step and you’ll find printers keeping the ink in the printing bank mixed and evenly spread out with spatulas.  You’ll find them in kitchens, paint and pigment stores, in labs and pharmacies, but you’ll seldom find them with doctors.

I don’t see too many doctor knives around, especially the older ones, so I was happy to find one from Rough Ryder.  Yes, they changed their name from Rider to Ryder.  I don’t know if it was the condom association or Teddy Roosevelt.  Perhaps the change was just a public relations move to get more notice.


I think of that blade as more of a sheep foot blade, but there is a high degree of freedom in naming blades 

The knife is 3.6 inches closed and has nickel silver bolsters.  It has a spey blade and the traditional spatula.  The handle is malachite and pearl from Stoneworx.  The knife has brass liners and the two blades are separated by brass as well.

All and all, it is a really nice doctor’s knife and I really like it.  Rough Ryder has an upscale group of knives, and this is one of them.  It is a nice example of knife art at a reasonable price.  You can buy one for the princely sum of $26.00.

I hope you enjoy it as much as I do!

Friday, November 5, 2021

Sea Snake

I finally got around to breaking out and using Artisan Cutlery’s Sea Snake.


Artisan Cutlery, sea snake, G-10 handle
Artisan Cutlery's Sea Snake


I came across it at the 2021 Blade Show and it followed me home.  I’m sorry I waited so long to break it out. 


Artisan Cutlery is a Chinese company making innovated blades as well as using interesting steels.   My Sea Snake was crafted from AR-RPM9, a proprietary powdered metal steel.

 

The formulation?  Well, it’s proprietary, but few compositional secrets remain secret for long.  Here’s what I found on the Internet:

0.9% Carbon,

18% Chromium,

1.0% Molybdenum,

0.45% Manganese,

0.1% Vanadium,

0.30% Cobalt,

0.2-0.8% Silicon,

less than 0.40% Nickle,

less than 0.05% Rare Earth.

I’ve never seen anyone list or express concern about rare earth composition.

 

Chemical analysis can tell you what’s in a product, but not necessarily how it performs.  Looking at these numbers, I could do this analysis with a half decent SEM and EDS.  There are no significant elements below 0.1%.  But like Coca-Cola, it’s how it’s cooked that makes the difference.  That would take some real research into metallography to unwrap those secrets. 

In any case, enjoy this steel, because I am.

 

The 3.15 inch flat ground Wharncliffe blade is fixed to a G-10 clad handle giving the knife a total length of 6.78 inches long.  The blade has a RHc value of 59-61.


I like the feel of the knife in my hand and I can’t stop playing with it.  The balance point is back in the handle and the finger groove provides plenty of grip and prevents you from sliding onto the blade.  That’s always important to me.   There is a secondary finger groove carved into the blade shortening the actual cutting edge to just under 2.5 inches.  Using the two finger grooves and the jimping on the blade’s spine locks the knife in my hand and gives me fine control over the blade.

 

The knife is designed by Mike Embler.  Mike is from eastern Ohio and spent 18 years in the  Navy.  He studied multiple forms of self-defense, including Japanese swordsmanship while stationed in Japan.  This helped shape his views on knives as tools and weapons.  It was in Japan he discovered the joys of flat grinds.

You should keep an eye out for him, I think you’ll be seeing more of his work.


Dressed-up accessory, neck knife, Wharncliffe blade
Dressed up  and ready for a night out.


I got the green G-10 handled knife in the khaki green sheath.  It seemed like the right color for a Sea Snake.  But the black para cord it came with was the pits.  Not content with that, I dug out some woodland camo paracord and found an almost matching green and orange glass bead and dressed up the sheath. 

 

Neck knives are becoming a fashion accessory for men; women too! 

Yes, I know they started out as a hidden weapon, worn under a shirt or blouse, a tool of last resort, likely to be missed in a fast pat-down.  But really, those days are gone.  Everyone checks around the collar for the tell-tale cord, pats the chest and under the arms.  Then there’s the metal detecting wand.  Just wear it as a fashion accessory.

Besides do you really want to go into combat with an unbreakable noose around your neck?

 

You can get you’re Sea Snake at https://www.artisancutlery.net/sea-snake-atz-1842b-g10-ar-rpm9?search=sea%20sNAKE&description=true for $39.98.  They currently have a limited issue made with S35vn steel and another with a carbon fiber handle at prices reflecting the more exotic materials.

 

Tuesday, September 28, 2021

Gerber Parabellum


Gerber folding knife
Gerber Parabellum:  Prepare for war


The Gerber Knife Company has a funny origin story.  It’s not secret but I find it amusing.  It's not about making knives, it's about selling knives.

It’s 1939, Hitler fires the opening shots of WWII.  A few Americans are concerned.  Leo Szilard and Albert Einstein draft a letter to President Roosevelt about the potential to build an atomic bomb and advising him to create and fund a government research project on nuclear weapons.

Joe Gerber owns an advertising agency in Portland Oregon that has been in his family since 1904.  Christmas is coming and Joe wants to give special presents to his best customers.  He has David Murphy, a local knifemaker, craft 24 knives.

Somewhere, somehow Abercrombie and Fitch get their corporate hands on one and they want to sell them.

Joe, knowing advertising and business, starts Gerber Legendary Blades by ordering more knives from David.  Eventually David and Joe separate and my source claims David Murphy, despite his fame, dies bankrupt.

Over the years Gerber has employed craftsmen who went out and established names for themselves.  Both Pete Kershaw and Al Mar left and started their own companies. 

It is reasonable to say Gerber started the knife business in Oregon.  Over the years Gerber bought knife designs from a list of Who’s-who in the knife industry.  The list includes Bob Loveless, Blackie Collins, Fred Carter, Ernest Emerson, Bear Grylls, and local hero Rick Hinderer.

Folding knife, Gerber
The Parabellum is not a pocket size knife


In 1987 the Finnish company Fiskars bought Gerber Legendary Blades.  Fiskars is essentially a holding company whose main business concern is owning significant portions of other profitable companies.  Fiskars also owns the classic British company, Waterford Wedgewood, who is themselves a holding company.  Let’s not go down that rabbit hole.

From 1987 to 1994 Gerber made the Parabellum aka Black Bolt.  It was engineered to be one of the stoutest folding knives ever made.  And if you ever handled one, you would believe it.  It is reported that Blackie Collin designed the Bolt Action, the mechanism used to lock the knife open.  It takes a little force to unlock the blade.  That isn’t always a bad thing.

I ran into this one and despite the shadow on the back of the blade I bought it.  The edge looks factory and it comes with the duty belt clip.  The pouch can be reconfigured so the Parabellum can be slipped into it with the blade open like a sheath knife.


Discoloration on back of blade

The 4-inch flat grind drop point blade is over an inch and a quarter at the widest point and 11/64 of an inch thick.  The steel is probably 440C, the best of the 400 series.  At the time 440C was premium mid-level steel for knife making.

440C stainless contains:

                                    C   0.95-1.2%

                                    Cr  16-18%

                                    Mn and Si at 1% each,

                                    Mo  0.75%

The steel is magnetic so keep it away from your compass if you’re navigating by map and compass.

Parabellum and sheath
Gerber Parabellum and original sheath



I think my Parabellum was carried and never used.  The pouch shows a little rust on the back snap and the cover snap seems to have been thumb polished.  The discoloration on the back of the blade appears to be confined chiefly to the portion of the blade not protected by the knife handle.  The handle itself doesn’t have a mark or scratch on it.

Gerber original parabellum sheath
Back of Sheath  It can be unsnapped and rotated to a drop leg sheath to hold the open knife

I’m going to leave it the way it is.

Wednesday, September 1, 2021

Window Shopping

I find myself window shopping in the Bƶker catalog.  It’s the adult version of creating a wish list for Santa.  Since I’m just window shopping, price becomes irrelevant.  Grab a shopping cart and come with me.


Bƶker 98K with those interesting handle grooves

I like working blades.  Knives that I’m going to carry and use and surprisingly they don’t all have to be tactical blades.  I really like the Bƶker 98K Damascus modestly priced at $419.00.  The blade is made from portions of the German Karabiner 98K, best known for its Mauser locking system.  Chad Nichols changes it into a ripple pattern Damascus blade.  



The clip point blade uses a nail nick to open and the handle scales are walnut wood. The knife has a protruding back lock and steel liners for strength. https://www.bokerusa.com/98k-damascus-110715dam


Swiss Dagger
I’ve always had a thing for Swiss daggers.  Maybe it’s the name, Baselard.  It was a popular weapon with pikemen in the 15th and 16th century.  The long tapering 18.5 inch blade with a double edge and distinctive hilt makes it a unique and recognizable weapon.  Too bad it’s associated with damn Nazis.  

Boker has a simple, working pikeman version too.

It’s not available at Bƶker anymore, but you can find it at…  Well I’m wrong, actually nobody has it here in the States.  It does seem available at the German Bƶker website.

I suspect it should be called Glamping, not camping.
I remember when being called a Boy Scout wasn’t a derogative term.  It still isn’t to me.  Perhaps that is why I like the Bƶker Camp Knife.  It sports a stag handle with a main 2.5 inch drop point blade and a smaller 1.75 inch clip point blade.  What would a camp knife be without a can and bottle opener?  Included is a leather punch/reamer and a cork screw for adult beverage camping.  

Your basic scout knife
This pattern has been in use since 1869 which was long before I graduated from high school and Scouts.  I wish I had one.  The blade?  Oh, it’s a 4036 steel, which needs a little care.  You can find one for $279.00.

https://www.bokerusa.com/camp-knife-stag-110182hh

What can I say, I have permission to use Boker's website images. 


Lastly, I’d want a Bƶker plus Nori CF.  It a thin streamline folder with carbon scales designed by Kansei Matsuno.  It’s a gentleman’s knife with a pocket clip and a subtle front flipper.  The 3.15 inch blade is completely submerged in the handle and it weighs in at 1.6 ounces.  

A little nicer look at the carbon fiber handle
The VG-10 blade rolls out on ball bearings and locks open with a liner lock.  It could be the perfect knife to tuck behind your cummerbund and it will not pucker the lines of your Savile Row suit.  The list price is a mere $120, which could actually be in my price range.

https://www.bokerusa.com/nori-cf-01bo891?number=01BO891

Ladies did I forget you?  No, I didn’t.

Damascus is hot this year.  The auto kwaiken has very good looks, especial with the abalone button

Bƶker makes a lovely auto knife perfect for elegant wear.  It’s a Damascus kwaiken with a 3.5 inch Chad Nichols virus pattern blade in a black handle weighting 3.4 ounces.   The activation button is inlayed with abalone.  It is very nice and expensive at $650, but you’re worth it, aren’t you?  At least I think so.  Unfortunately, it isn’t quite available yet.

https://www.bokerusa.com/kwaiken-automatic-damascus-06ex293dam

There no sense leaving post-it notes on the pages.  My wife just throws her hands up and says, “You want it?  Order it.  Don’t make me a party to your edge lust!”  It’s a thought, but I’d rather window shop.  There is always a nicer one out there.