Gerber Pixie and Sportsman II

Most of us know the story of Gerber Legendary Blades.  Let me add to what I wrote at https://knifesearch.blogspot.com/2021/09/gerber-parabellum.html.

Gerber Legendary Blades is an American maker of knives, multi-tools, and other outdoor and military tools headquartered in Portland, Oregon.  Gerber was established in 1939 by Pete Gerber and is owned by the Finnish outdoors products company, Fiskars.

Gerber is claimed to be the largest maker of knives and multi-tools for the United States armed forces.  Backing up that claim is a wide variety of combat-style knives, Many of which are highly collectable.  Susan J Dorey states in her publication (1) that Gerber switched on December 8, 1941, from making kitchen knives to military knives.  That was the day after the Japanese attack on Pearl Harbor. 

Gerber's Folding Sportsman II -  From around 2000

Slightly off topic, but I found it interesting that Gerber and Emerson Knife formed an alliance to produce an automatic knife, AKA switchblade.  Interestingly, it was the first automatic knife made by either company.  The knife was based on Emerson Knives’ Raven knife design.  The auto was an issued item to specific military units.  You can look it up if you want to go down that rabbit hole!

NSN (NATO Stock Numbers): 5110-01-516-3243

A couple Folding Sportsman from "100 Legendary Knives"  by Pacella

I recently got hold of a Gerber Folding Sportsman II.  They were released in 1972.  The FS II was later discontinued in about 1995.  It’s a nice knife.  Many people found it a convenient substitution for the larger, clunkier Buck 110 Hunter.

The blade is just over 3.5 inches long and can be described as a flat grind, straight-back blade.  I couldn’t find anything listed but I suspect the steel is 440C, a common, but still used knife steel.  The handle is an attractive blend of brass and wood.  Of course, the blade locks open.

Gerber Folding Sportsman II

          The tang stamp doesn't appear to be anything unique.  The tang marking system developed by Case Knife is, without a doubt, genius!

It simply says 'Gerber' on the other side

It's an icey cool knife, and I'm lucky to find one this nice.

The other Gerber under discussion is the Gerber Pixie.  The Pixie could be best described as a bird and trout knife or a lightweight kitchen fruit knife.  

A Gerber Pixie

        There is an elegant simplicity to this knife.  It seems too nice to be used for kitchen work or field dressing.

The only identification is stamped into the handle "Gerber-Pixie"

The story here is a little more complicated, and I must find some reference books.  I thought I could fall back on my old trick of looking up Gerber's catalogs online, but they don't seem to have any.  Damn shame about that!

My limited research shows that the Pixie is a member of a family of Gerber aluminum-handled knives.  Some handles were given a coating to increase friction and improve grip.  I've found examples of Pixies with leather sheaths, the knife sans sheath, and at least one with a wooden sheath.  It is just an ordinary kitchen knife.

I find the smooth flow of the handle and blade attractive.  To me, it almost has a futuristic look

Here is what I consider interesting about this knife.  My friend Derrick found it at Harbor Freight in 2005.  "I don't know," he told me.  "They just had a pile of them.  Thought you'd be interested."  I was, but not enough to rush out, and by the time I did get there, they were gone.

(1)  http://www.susandoreydesigns.com/insights/GerberLegendaryBlades.pdf

 

Benchmade 730 Elishewitz

         I just came across a pristine Benchmade 730BT Ares designed by Allen Elishewitz.  It’s an amazing knife, and I'm lucky to have it pass through my hands.

Let’s walk through what we can find out about it.

Benchmade 730BT by Allen Elishewitz

The Benchmade logo has changed over time.  This logo says Benchmade across the butterfly and has two antennae.  Under the butterfly, you'll find U.S.A. printed.  This was the logo Benchmade used from 1999 to 2002.  The back side of the blade says Elishewitz next to his logo.  Above this, on the false edge, it says 154CM.

The 1999 to 2002 Benchmade Butterfly

Blade Forum claims the original release in 2000 was with ATS34 steel.  The following year, 2001, the steel was listed as 154CM.  Other variations were released, but the next important marker was in 2003.  The knives produced then did not have Elishewitz name or his logo on the blade.

This makes me think the knife was produced sometime during 2001 or 2002.  Pretty cool!

You only need to look at one of his knives and you would know Allen Elishewitz was born to design knives.  Actually, Allen was born in Texas and spent a good part of his childhood living in Southeast Asia.  Allen played a variety of martial arts and later became a Recon Marine.  This background gave him well-defined ideas of what makes a good knife for either self-defense or as a utility tool. 

The ARES is designed to allow the user to move the pocket clip to left or right carry.

The Benchmade 730BT Ares has an icy purple and black G-10 handle.  G-10 is a fiberglass/epoxy resin composite.  Fiberglass has the advantage of not absorbing most liquids, like water, beer, or blood.  G-10 has excellent dimensional stability and extreme resistance to normal environment hazards.

The blade is black coated 154CM steel.  You could describe it as a drop point, saber grind blade.  The blade is free of jimping, but the steel liners near the axis lock are jimped.  The blade has for all practical purposes a full length false edge.  The combination of grind line makes the blade interesting.

154CM steel is an interesting stainless steel.  It was developed and manufactured in the United States by Crucible Materials Corporation (now Crucible Industries).  154CM is a modification of 440C stainless.  Molybdenum was added to beef up its edge retention, corrosion resistance, and ease of sharpening properties. 

In case you’re interested, here is the formulation:

Carbon 1.05%  Chromium 14.00%  Manganese 0.50%  Molybdenum 4.00%

Silicon 0.30%  Iron 80.15%.

All this is very interesting, but you know what really matters?  It's how it feels in your hand.  And Allen’s design feels excellent.  The blade opens smoothly and locks in place with a click.  I like that.  The click tells me the knife is locked open, ready for whatever task I assign it.  The G-10 handle has two steel liners, so the weight of the open knife is kept in the hand.  The balance point is about an inch behind the axis lock.  This makes for a lively, controllable blade.

I like it a lot.  As I said earlier, it's just passing through my hands.  But then, it may stick around for a while.  Who knows?