Showing posts with label sheaths. Show all posts
Showing posts with label sheaths. Show all posts

Sunday, October 13, 2013

Kydex

I’ve been working on building a Kydex sheath for my little South African dagger.  I’m using two different colors to make a black and blue sheath. It isn’t that I like the colors, it’s the ease of molding I like.  The black Kydex is 0.06 inch thick and the blue checks in at 0.04 inch.  That small difference really lets the blue Kydex mold detail so much better.

Having played with these materials in the past I decided to mold the belt loop as a continuous part of the sheath.  I cut out a piece of each to the same width, giving myself a lot of extra room.  I made the black backing four inches longer to be folded later into the loop.  Surely that’s enough I thought.  The belt loop template was fabricated by cutting thin Masonite into strips 1.75 inches wide and 3 inches long.

I wanted a drain hole molded in the Kydex and I got the idea of cutting a groove down the center of a small dowel rod and taping it over the blade tip on the central axis to the blade.  It also occurred to me it would create a reference mark when I assembled the two sides of the sheath.  It worked well for those purposes.   

I taped the edges with blue painter’s masking tape and started molding.  The thinner blue Kydex took nice sharp impressions of the little dagger. The thicker black material provided a nice flat back with just a hint of the knife impression.

The Kydex pieces weren’t perfectly matched, but I had cut them oversized so I was able to line up the two halves.  Between the heat gun and the toaster oven I was able to wrap the excess Kydex around the Masonite without affecting the previous molding.  I used a couple of pop rivets and washers in the corners of the excess Kydex to align the two halves for drilling.  I wanted to use small black 0.3 inch eyelets to fasten the two sheets together.  They were the right diameter for the size of the sheath.

Everything went well until I was drilling my last hole.  The drill bit grabbed the Kydex, ripped it out of my hand and boogered the hole.  The eyelets would no longer fit.

Well.  I just decided to pretend I had that planned and used a Chicago screw and o-ring as a compression screw to alter the sheath tightness.
My first Kydex sheath for my South African dagger
The compression screw would work better higher up on the sheath, but it's hiding an oops!

Back: showing the belt loop as a continuous part of the thicker Kydex material
back of the sheath

But I knew what happened. 

I called the first one a prototype and then went to work on another one.  This time I decided I would mold the belt sheath separately so the under construction sheath would lie flat flatter on my drill press and have less chance of hanging up on the bit.

That worked.  With the aid of a set of French curves I trimmed the sheath with my band saw and fastened the belt loop.  A little sanding on the bench sander (that’s why I make everything a little bigger than I need) and I had a relatively nice sheath.

Second Kydex molded sheith.
This worked out nice.  The image is a little nicer than the actual Kydex sheath, but I'm happy with it.

What to do with the first one?  I had a can of textured tan paint from Rustoleum and thought ”Why not?”.  The paint took a while to dry but I like the effect.  The paint gives it sort of a desert sand/camo look.

The second one I decided to leave black and blue.  I’m learning to leave well enough alone!

Both sheaths
I'm not sure which shape I like more, the painted Kydex or the two-tone job.  I'll have to get some black or gray Kydex and repeat these sheaths.
Everything was great.  At least until I suited up with my new knife sheath.  The belt loop fit like a glove, but the loop is so tight the sheath can’t move up or down when I sit.  It also catches on jackets and long coats.

So now I’m thinking about attaching a larger belt loop with a pivot (most likely a Chicago screw) so the knife sheath can move on the belt as well as rotate.


Still, working with Kydex has been fun and I have more than a few knives I want to re-sheath.  I’ll keep you informed.