Screw Loose

 My wife’s current favorite pocketknife, a purple SixLeaf, lost the screw holding the clip to the body.  Fortunately, the knife slipped further into her pocket, and somehow, the clip was retained.  The screw, however, vanished.

Of course, I wanted to repair it.  SixLeafs aren’t that expensive and but there are no local distributors I can contact for a replacement screw. 

Fortunately, I had a SixLeaf of my own and was able to confirm it was the same screw.  But what kind of screw?

She wanted the purple one and I opted for green

My friend Derrick speaks fluent machinist.  He was able to identify it as 2.5mm X .45 screw.  In the bonus round, he even produced the proper replacement screw.

We had the knife and the clip and when we got the screw, well, everything worked.

That greatly simplified my job.  I didn’t want to force an incorrect thread into the knife's titanium frame, so having the correct one was excellent. 

Lot of brands available, any one would work

I got out my semi-permanent (blue) threadlock and #9 Torx drivers and went to work.  I used a single drop and let the threadlocker wet the threads and drained off the excess into a paper towel.  This left me with a tiny ribbon of blue winding around the thread root.  I screwed everything back together, finger-tight.

Done!

My wife got her favorite knife back, so it’s a great outcome in my book.

Thanks, Derrick!

What's In Your Stocking?

Stocking stuffers?  We don’t need no stinkin’ stocking stuffers…

That's not true, is it?  During the Christmas Holidays, there is always a need for little gifts.  This is especially true if you're a knife fancier.  We all need oils, waxes, polishes, sharpening doodads, and whatnots, but we sometimes hesitate to buy for ourselves.

Let me give you two ideas any knife fancier will want.

There are various products like these two, I just happen to have these on hand.

Every pocket knife I’ve owned has screws, nuts, and bolts that all what to back out and get lost.  Every clip has at least one screw that wants to be somewhere else.

The solution: Threadlock.  People have used nail polish, airplane glue, paint, and other solutions to keep screws from backing out.  McBride writes during the Great War, WWI, he and other shooters rusted their screws in place with iodine.  There are better solutions for a pocket knife.

I'd get the blue semi-permanent.  It will keep the gremlins from backing out screws.

The trend today is to use torx screws.  Those are the screws that need a star-shaped driver.  They are the hot fasteners today, and most of your knives will be assembled with these specialty screws.  If you want to replace a clip, disassemble, and clean your knife, you’ll need the correct torx driver.  Husky makes a nice set of four double-ended drives housed in a nice plastic body.  The end cap rotates so you can put finger pressure on it and still turn the driver.  The drives range from the tiny T4 to the smallish T15.

Two easy stocking stuffers for your favorite knife owner, even if you buy these for yourself.

Secrets of the Sorting Hat

 

I've moved, which forced me to confront my knife collection with the certainty that all good things end.  My previous dwelling had plentiful storage, but the new digs, well, not so much.  I’ll add cabinets, shelves, and drawers for storage, but I need to deal with limited storage and the need to put things away.

The move has also prompted a confrontation with my mortality.  Do I want to continue to curate knives I have for no apparent reason?  As much as I wish it, I do not have a Harry Potter sorting hat to make determinations for me.

I realized that all my possessions could be categorized into two distinct classes and a third, more nebulous one.  The first two are obviously "Keep" and "Discard.”  The third is “Maybe.”

Don't let this fool you.  There are only two options.  Maybe is actually a Discard.  If a knife doesn't create enough passion to become a Keep instantly, it's a Discard you're trying to be polite to.  Ditch it.

The original Tigersharp

Here’s a couple of examples.  I picked up a Tigersharp at the SHOT Show.  The company later sold the design to Camillus.  The novelty is the replacement blade eliminating the need to resharpen the knife; just use a new blade.  It's going.

Boot dagger from S&W

Years ago, at the Knob Creek Machine Gun Shoot, I bought a S&W H.R.T. dagger boot knife.  I am still trying to understand why.  The handle is too small, the blade is sharp on one side but not the other, and I don't typically wear the proper boots.  Bye-bye boot knife.

Boker's Pocket Knife by Mickey Yurco

I bought a knife from Boker, designed by Mickey Yurco, called the Pocket Knife.  Mickey told me he thinks of it as a self-defense tool, but Boker, fearful of public backlash (What!  You mean to tell me you could hurt someone with a knife?) calls it a camping or survival knife.  I wore this on my pack for years.  It's a keeper.

So, there you have it.  When you start thinking about that great collector's meeting in the sky and can't decide what knives need to find a new home, remember, Maybes are just polite Discards.  You really didn't care for them in the first place.

 

Unpack: CRKT's Kith and Razelcliffe

 

Receiving and unpacking knives is one of my favorite activities.

I just got two from Columbia River Knife and Tool and they are both winners.  The first knife is the Razelcliffe, designed by Jon Graham and the other, the Kith, designed by Ken Steigerwalt.

The top is the Razelcliffe and the bottom the Kith.

The Kith is a locking folder with a 3-inch blade ground from 8CR13MoV stainless steel.  It is a good knife steel, especially for a working knife.  Compared to D2 (you'll see why later), D2 tends to have more edge retention and hardness than 8Cr13MoV but is more expensive and less corrosion resistant.

The Kith utilizes a front lock set in the 3.75-inch glass-reinforced nylon handle.  It is relatively lightweight at 2.3 ounces; I get mail heavier than that.  I like the handle, but the contrast in the black handle is not from pigmentation but surface geometry. 

Unfortunately, the gray handle spots are just different reflectivity

It's a good length for many basic jobs at a campsite, fishing, in the office, or preparing the yard for winter.  The Kith has an MSRP of $40.  You can't go wrong at that price for a working knife.

 

Years ago, I had a Razel with a stag handle from CRKT.  I last saw it in the pocket of an Australian heading home to their anti-knife culture.  I hope he made it.  It was a very cool knife.

The Razelcliffe, let me suggest it would make a very icey club knife.

The Razelcliffe is also very cool.  The 2-inch blade is made from D-2 steel (see, I said we'd get back here).  D2 isn't quite stainless, but I never see rust on any D2 knives I own.  A little oil takes care of all my problems.  D2 takes and holds a good edge and can be resharpened with basic stones.  The Razelcliffe utilizes a frame lock and IKBS ball-bearing pivot.  That is very cool!

The G-10 handle is 3.25 inches long, and the knife weighs 3.3 ounces. 

The MSRP is $48, a reasonable price for a step up in cool factors. 

I've always thought CRKT over-engineers their knives.  You get a lot of knife for a reasonable price.  That’s invaluable in a world where you pay for a name.