Blade Show Day 2

Mark Zalesky, the editor of Knife World has purchased the paper and is now the editor, publisher, and chief bottle washer.  We spoke for a while at the BLADE Show and he’s quite excited.  I think you’re going to see big changes at Knife World.  Good Luck, Mark!

I was visiting at Spyderco and enjoyed some of the inside stories about knives and knife makers.  They have just expanded with a new 17,000 square foot manufacturing area.  That means more knives stamped Golden Colorado, USA Earth on the blade tang.  They are still figuring out the best way to set machines and organize work flow, but do you know what they’re most excited about?  The factory windows can open letting in fresh spring air, that’s what! 

They are reintroducing their line of kitchen knives.  While not as nearly as heavy as many profession knives, they are nicely balanced and sharp.  I love their bread knife and the little paring knife.  The large santoku doesn’t have the little air breaks indentations seen on other santoku.  That might just be an advertising ploy, well have to see how it works.

The Positron.  This knife is so cool both my wife and I want one!

I got to handle their new Positron.  It’s a 3-inch flipper blade made out of S30V in a carbon fiber handle.  It weighs 2.6 ounces.  It’s lovely!!!

Here’s another knife from Phil Wilson and Spyderco.  It’s called the Sprig and sports a 2.23 inch blade made from S90V steel. 

The Sprig

It’s a bird and trout fixed blade.  The sheath is still under development.  While it targets a specific use, it would make an all purpose camp and cooking knife.  S90V has high chromium levels for corrosion resistance and high vanadium and molybdenum.  These last two elements form tiny but incredibly hard carbides which should give great edge retention.

Of course Spyderco and everyone else is still plagued with knock-offs from China.  If you have searched for Spyderco or Benchmade you’ll find that Wal-Mart has them and at incredible prices.  Spyderco tells me Wal-Mart isn’t getting these knives from them, so who’s wholesaling them?  “Lot of counterfeits out there.  You get what you pay for.”  Take that as a quote!

Stopped by Benchmade to look around.  Try and get your hands on the 665 APB Assist.  It’s vey new and quite exciting.

The Benchmade 665APB

Most of us are familiar with the Benchmade Axis lock.  The lock is thought to be one of the strongest and certainly easiest to use on the market.  The APB Assist does away with the axis lock and replaces it with a dual button lock.  The person I spoke to at Benchmade told me it was just about as strong as the Axis lock.  I haven’t used the knife yet, but I can’t help but wonder if my grip would accidently depress both buttons.

The two buttone must be preseed together to unlock the knife.  It's very smaooth and a natural move.

The knife opens normally but to close it you pinch both buttons inward and that unlocks the blade.  Very slick.  The 3.6 inch blade is made from 154CM steel and the blue and black handle is very nice.  Benchmade told me they were trying to introduce a color in to the overwhelmingly black tactical market.  The APB Assist also comes in a full auto version (6800 Auto APB Assist).  The catalog shows it black, but the version I saw was blue and black with the same handle.  I suspect it was a quick production so it was available for the show.

Benchmade is making several other autos aimed at the civilian market with clean powerful lines.  Several don’t even look like autos.  The auto APB Assist an excellent case in point. 

Benchmade also has this cool service at the Blade Show.  They will engrave any Benchmade knife blade with any text.  The laser engraver isn’t much bigger than a couple shoe boxes cabled to a laptop computer.  The text is typed in, moved around and sized.

I remember when engraving lasers were the size
of a small auto!

.  

Spelling is checked and you can see the size and position of your text outlined in red laser light

When everything is set up they close the doors and punch go.  A bright green spot of light burns the text into your blade.

Now you can personalize your Benchmade for the cost of a trip to the Blade Show!

If you are going to Blade, take your Benchmades and get them engraved!

I stopped at Buck and found myself talking with CJ Buck.  At the WRCA knife expo I bought a nice new Buck 110 Hunter with what I was told were stainless steel bolsters.  Having a Buck for years, it soon became apparent the brass bolsters react with the fatty acids in the leather to produce a green corrosion.  I was wondering why Buck stopped make 110’s with the stainless steel.  CJ told me they never made a steel bolster.  That would require machining which would drive the price up.  

What I have is German Silver, a mixture of 60% copper, 20% nickel and 20% zinc.  It turns out that brass and German silver have about the same melting point so the same casting equipment can be used for both.

No Blade Show is complete without a stop at Santa Fe Stoneworks.  It only takes one look to be convinced to stop and ooh and ahh.  Truly impressive knives.

A small selection of the knives

I’ve see this knife-making display before.  Knife-making made simple. 

See!  Five Steps!

So what’s stopping us?

I’m walking around and I see a name I thought I recognized from a knife blog I read.  She’s an elderly lady standing behind a counter talking to a customer.  In front of the counter stood a short, silver haired woman talking to a distinguished looking elderly man.  I was waiting for the customer to leave the counter when the silver haired woman turns to me and says:

“How are you?  It’s so nice to see you again!” She throws her arms around me and gives me a hug.  I don’t know this woman.  The conversation goes:

Me: “Thank you but I don’t seem to remember your name?”

Her: “Oh, you were drunk that night.” 

I haven’t been drunk since high school graduation, so if I met her then, she has a remarkable memory.  What am I going to say to her?  Oh, I got it.

Me:  “Perhaps you're right, would you please tell me you name again.”

She does and I’m still not coming up with any connections.

Me:  “I’m afraid I don’t recognize what name.”

Her: Do you know Blackie Collins?”

That when the ants started marching up and down my spine dragging ice cubes.

 

Me: “Well, of course I know of him, but I also met him years ago at the SHOT Show.  He was very kind to my wife and myself.  A gracious man.  He unrolled these large scale drawing of one of his new knives and showed us how it worked and what the interesting design features were.”  I ran out of things to say, so I ended with ”He was very nice to us.”

Her: ‘I’m his widow.”

Oh!  Well what else can you say other than “You have my deepest condolences.”

We yakked a bit and I excused myself only to find out the woman behind the counter wasn’t the blogger I thought she was. 

Here’s a few additional photos from Blade 2015:

Grinding Demo by John Horrigan  Too many people to get a nice shot of the actual grind

The art of Chris Reeve's knives!

Blade Show Blast Off!

The BLADE Show is off with a BANG! 

At least that’s what you’re lead to expect reading the blogs.  Here’s the reality.

The show starts with people lining up for HOURS before the show opens.  I was there 2.5 hours before it opened and found that the end of the line was all the way down the hall, and blocking the concourse.  By the time it opened the line stretched down another hall, across, then snaked over, reversed, and headed into the adjacent hotel.  By that time the smarter people just sat at the entrance and waited for the opening bell.  The end of the line eventually reached them and they walked in the door like normal people.  I wonder what time the first person in line arrived to get that number one spot?

Early morning line up.  Who was suppose to bring donuts and coffee? 

About an hour before the opening the line starts to compact itself and soon begins to vibrate in anticipation.  It’s a dangerous condition.  Management came by and told everyone they couldn’t block the concourse and everyone involved collectively told them to shove it.  Cooler heads prevailed and they got the passageway opened. 

While sitting there I met Phil Wilson.  He’s a knife maker from California, now retired and has been for 25 years.  (PS 8 June 15  I just found out that Spyderco consideres him one of the top 5 knife metalurgist still living. I wish I have know that when I was talking to him.)  Some of his work is being considered by Spyderco, but he had a few knives with him.  

One of Phils knives.  He makes a nice blade!

Phil is a true hobbyist: he makes 5 knives a month for his own pleasure and isn’t interested in creating an industry around himself.  I thought his knives were very nice.

I stopped by Santa Fe Stoneworks.  They are buying their stabilized ivory and a resin material called Sparkle from Raffir in Denmark.  These materials are very nice and I really like the Sparkle which is a plant fiber and aluminum shavings in colored resin.  Prices are floating up and I expect them to continue that way.

Remember one of the Terminator movies with the liquid metal bad guy?  The Miltner Adams Co. is making something like that.  It’s a moldable metal that’s reported to be double the strength of titanium and was developed by Caltech/NASA.  The metal technology allows you to injection mold complex shapes to a high degree of tolerance.

The stud on the top of the round hole controls the sheath.

As a result they have developed the Hybrid Knife.  It’s a fixed blade and you slip your fingers through the knife handle to provide a non-slip grip.  By pressing a stud just above the central circular opening you can pop the metal sheath off the blade to expose the cutting surface.  By manipulating the stud it will close the sheath over the blade.  Frankly, it is an acknowledgment that most of your (and mine!) cutting is mundane and of short duration.  The metal sheath can be removed if you want.

The knife has a Rockwell C of 53.  That’s pretty low but the salespeople told me that was the non-heat treated value.  They also told me if you slip the knife in the oven at 300° overnight you’ll find a very different metal in the morning.  I’m going to assume that would be bad.  This kind of heat treatment usually results in dimension changes, so your knife might not fit together so well.  So don’t do that.  It’s a very interesting knife as is and a very interesting look at manufacturing.

We lucked out at Cutco.  Loren, the local sales rep, has been changing out his display knives for new ones and my wife found one she liked at a great price.  He remembered us from last year and told us what we had bought.  That impressed me.  Cutco owns Ka-Bar and makes very nice kitchen knives so take a look at them if you’re upgrading.

My wife's new knife

Later at Stone River Gear she found a ceramic black bladed folder she really liked.  We often get requests for ceramic folders so we’ll see what one does on our sales table.  Yeah, I bought a second one just for the table.

Imagine our surprise at the Benchmade display when we were asked what’s our home town.  The sales rep was so surprised by our answer and his name seemed familiar.  It turned out he knows our neighborhood pretty well.  He should.  He’s lived there and his dad was the real estate agent who brokered our house 30 some years ago.

Here's a few more pictures:

Before the general admittance at noon

One was to carry a butterfly, clearly a custom job!

That it for tonight!  Stand by for day 2

BLADE Show Count Down

It’s the day before the Blade Show (June 4^th) and frankly it was an interesting trip.

Last night we stayed in Richmond at my niece’s college apartment.  She can’t move in yet because she has a gig at a golf course in Akron, Ohio.  The landlords around her university (EKU) have 12 month leases so most of the rentals are empty, but leased.  That gave us a place to flop. 

This first floor of the apartment.  The two bedrooms are up a long winding stair case, still it's a nice palce.

Her stuff is largely moved in but unpacked.   So we had to make the bed and it was just one step above cutting wood to length.  Still, it saved us a nice hunk of change and it’s a very nice place, especially considering it’s student housing.

We left a little something so my niece will rememeber us when she moves in.

We didn’t hit any traffic until we got about 2 miles from our exit.  One of those informational signs informed us an accident on a ramp between our expressway and another had tied everything up.  Informative, yes, but ultimately useless.  It might have just told us we were fire trucked.  (Clue, cross out the right letters for our true condition.)

Anyway, with the help of the GPS we found our way to the Hampton Inn.  It’s one of the nicest rooms I’ve stayed in, including the Piccadilly Hotel in London.

I want to check the convention center out and then it’s off to Ted’s Montana Grill for supper.

Normally the Blade Show does both Blade University and free seminars.  The university deals more with running a business, grass roots efforts to assure knife rights, and such.  The free seminars, which I really enjoyed, dealt with how to field sharpen your knife with anything, best sharpening practices, DIY knife photography, etc.

That’s all gone.  Everything is a pay-to-watch Blade University programs.  For example, a perfect subject for the free seminars would be what to look for in a knife, now its $20.

There will still be the cutting contest and other demos in the courtyard, but it’s only a matter of time before they disappear.

Oh, the reason given for the abolishing the free seminars?  To pay the big knife makers who are giving the courses.  I don’t know if I believe that.  After all, next to the Blade Show this is the biggest knife show in the country.  They would be here anyway.