Thursday, March 28, 2019

Edging Along


Ceramic knives have amazing edges.  By amazing I mean sharp with long term edge retention.

Basic folding ceramic pocket knife
Ceramic knives are typically made from zirconium dioxide (AKA zirconia).  Many manufacturers produce these blades through dry-pressing followed by firing of powdered zirconia. 

The resulting blade has a hardness of 8.5 on the Mohs scale of mineral hardness.  At the top of the scale sits diamond with a 10 while steel ranks 4.5 for normal steel  This means a ceramic knife blade is significantly harder than steel edges.  So the resultant blade stays sharper longer.  The downside is it is less elastic and more brittle than a steel edge.
 
These knives are typically designed for food preparation like slicing boneless meat, vegetables, fruit and bread.  The non-reactive nature of the zirconia means it will not be affected by acid foods like lemons, apples or tomatoes.

Like many minerals, zirconia undergoes several phase transitions which can weaken the blade.  Minerals like calcium, magnesium and/or yttrium oxides can be added to stabilize the blade.  These produce a white ceramic.  A black-colored blade results from adding a hot isostatic pressing step, which increases the toughness.

The blade is electrically non-conductive and non-magnetic so it isn’t seen by metal detectors.  You’ll often find small ceramic blades sold as part of a self-extraction kit hidden in your clothing in those countries when kidnapping is a national sport. 

The factory new edge looks like this:

up close with a zirconia blade
I'm guessing each of these defects are about 200 um in length.  Could be from having blades in contact with each other  at the factory.
new zirconia knife edge
Looking straight down on the edge, even at +63 X magnification, the edge is difficult to find.

But even here small defects from manufacturing can be found.  While very tiny, they could be beginning of larger ones. 

After enough years your edge will have sections like this:

Used zirconia knife edge
Seven year old edge,the big defect looks about the length as the new edge, but deeper. 

Dirty Harry once said a man has to know his own limits.  With care the blade will last for years before sufficient damage forms to the blade edge making the knife unusable.  The edge photographed to show you these defects still has years of cutting left in it.

used zirconia knife edge
Despite the 'dull' spot this edge has plenty of life left.


Last word, don’t try sharpening it yourself.  Even with fine diamond powder, any uneven pressure will only cause more damage.  Many of the manufacturers have a sharpening program you can take advantage of. 

Sunday, March 17, 2019

Chinese Lum


Happy St. Patrick’s Day!

I thought I would do something in green to commemorate the saint that drove the snakes out of Ireland and caused so many others to see them.

It was October 2002 and Knives Illustrated published my very first knife article. It was about the green handled Spyderco Lum.  I wonder what I would say now if I was writing the article.

Knife illustrated
2002 cover with my article, and no, I didn't make the cover.

I’d tell you more about the steel.  Its Japanese steel designed by Takefu Special Steel Co. Ltd aimed at Japanese chefs.  But since the steel is cooked with 1% carbon, 15% chromium, 0.2% vanadium, 1.5% cobalt, and spiced with 0.5% manganese and 1% molybdenum, it was soon popular with many knife companies.

Spyderco Lum folder


At the time it was a super-steel but now is considered simply really good steel.  It compares well with ATS-34 and 154CM but the higher vanadium levels produce smaller grain size and better stain resistance and toughness.   We’re talking edge retention improvement here.  Spyderco told me the hardness was in the 58-60 Rc range.  The blade was offered as a plain edge as mine was or fully serrated.

The blade is a flat grind with a tapered leaf shape associated with many of Lum’s designs.  The green Almite-coated handle is chamfered to soften both the looks and provide a comfortable grip.  The knife is set up for right carry with an option to alternate between tip-up and tip-down.  I’m a big fan of tip-up carry so I never changed it.

Back of Lum folder, spyderco




Almite is an anodic oxidation process of aluminum with very good hardness.  

Bob Lum was born and raised in Astoria, Oregon and between hunting and fishing and his work as a freelance photographer he developed a keen eye for blade shapes and edges.  He started making knives in October 1976 and is considered the popularizer of the "tanto" style which he based on older classic Japanese style.  The interest in tantos has not faded.  They have generated a love-hate interest in the knife community and will remain an important blade option. 

spyderco lum
Bob Lum's chop.  A nice touch of class.



Lung cancer took Bob on December 4, 2007 at age 64. 

Shakespeare wrote “..the good is often buried with their bones.”  He is wrong in this case.  Many of Bob’s designs and sketches are still being uncovered and sold to top end knife companies.  His son and wife are involved with producing his ideas and you can find them at http://www.boblumknives.com/welcome.html




I still carry my Lum.  It has become a dress knife and I wear it for weddings, funerals and anytime I need to notch up my attire beyond business casual.  Spyderco still has Lum designs, but if you want a green Lum Chinese folder, you’re in for a search.  Good Luck!



Monday, March 11, 2019

Remington Knives


 Most of us think of shotguns when we read about the Remington Arms Company.  Founded in 1816 in upstate New York, Remington holds the record for the nation's oldest continuously operating manufacturer.  It still operates in the original, but updated plant, in Ilion, NY.

Remington also makes some of us think of knives as well.  It’s only natural that a cross-over product is popular with the blade and gun crowd:  the Bullet Knife.

Bullet, knife
Has a buck look, doesn't it


The first Bullet knife was introduced in 1922. Many variations of this collectible knife have been created since that time.  These knives are often produced in limited qualities creating demand and keeping the price up as well.  They are highly collectible.   More modest lines are also created for users with limited resources who want a quality knife, but not a special edition.

It should be no surprise in this day and age that Remington does not actually make their knives.  Like S&W they license their brand.  I will not say anything unkind about S&W knives.  For the price they are a serviceable knife.

Buck Knives has the current license and will be producing the 2019 Remington Cutlery lineup.  In 2017 they acquired the Remington license and have continually produced quality knives with the Remington stamp.

Tactical knife


It should come as no surprise that 420J2 blade steel will be the principle blade steel.  Buck has extensive experience with it and produces a solidly performing blade.  420 steels range in carbon content between .15% and .40% with 12-14% chromium.  The steel reaches a hardness of 57RC after suitable heat treatment. Buck is famous for their proprietary heat treatment.  420B ( 420J2 ) is an economical, highly corrosion resistant stainless steel also used in diving knives.

A super steel?  No.   But one you can count on?  Yes.

Remington is doubling their Buck-produced tactical knife line for 2019.  You can find assisted opening, tanto and partial serrated blades as well as the classic drop point and plain edge, all with 420J2 steel

Remington knife
A nice EDS knife


EDC Line
While I carry what might be considered a tactical EDC, Remington also has a smart line of EDC.  These are medium to small pocket knives you can utilize at work, church and play without anyone thinking twice about it.

All Remington products are backed by a Lifetime Warranty. Find out more at www.RemingtonCutlery.com

Friday, March 1, 2019

Knife Review: ZT450CF


Ah…Belarus, a small Eastern European landlocked country best known for its Stalinist architecture and grand fortifications.  If you’re stopping for a tour, make sure you visit KGB Headquarters looming over Independence Square and the many Great Patriotic War monuments commemorating the country’s role in WWII.

Sounds bleak, doesn’t?  Especially the tour of KBG headquarters which could last 20 to 30 years.

Zero Tolerance, Knife, Belarus
I really like the carbon fiber handle.

From this country comes Dmitry Sinkevich, knife maker and artist.  His knife designs are snapped up by companies like Spyderco and Zero Tolerance.  It only takes a simple look to see why.

Let’s look at his design, the ZT 450CF for example.  The knife sports a 3.25 inch slice of CPM S35VN.  More on this steel later.  The blade is a saber grind, drop point with a long false edge and flipper.  The blade glides open on KVT ball bearings.  The front of the handle is carbon fiber and backed with titanium.

The clip is reversible and provides a relatively low profile look when pocketed.

This makes for a very trim and graceful knife weighing in at 2.45 ounces. 

The lock mechanism is a standard frame lock, but because titanium can’t be hardened to the same values as steel, the locking bar sports a small steel insert that serves two functions in addition to locking the knife open.  One, it takes the wear of contacting the steel blade and two, acts as a stop to prevent the bar from being pushed out beyond its elastic limits.  The insert, in case you were wondering, is replaceable.

Dmitry Sinkevich, knife
The carbon fiber is striking.  This is a very nice Gent's Knife.


S35VN is martensitic steel which contains 3% vanadium and 0.5% niobium in addition to chromium.  All three elements are carbide formers, but chemical properties favor the formation of vanadium and niobium carbides over chromium.  These two carbides are harder and finer in size than chromium carbide and reinforce the steel more. 

Tests by CPM indicate the steel has better edge retention, less wear and more corrosion resistance than many steels including 440C and D2. 

knife
I like the open back and the green spacers are just for fun and very cool.


The knife is strikingly impressive in my opinion.  It fits my hand and the blade flicks out on the KVT ball bearing.  The knife is set up for tip-up carry and the clip is reversible for left or right carry.

I can’t take it for a test run, as it’s not mine to use.  If ZT would like to send me a writer’s sample, I’ll run some cutting tests and expand this. 

The Sinkevich ZT450CF is light, trim and comfortable to use knife which is, bladed with a techno steel to give you long life and edge retention.  Frankly, at the retail price of $245 it looks like a bargain. 


Monday, February 25, 2019

Provoke


A recent episode of the “The Rookie’ shows one of the characters showing his last resort knife to his training officer.  It resembles a Benchmade 175BK push dagger.  It’s a short story arc that helps support the longer main arc.   

Still, one can see why real LEOs will carry a last resort weapon.  They don’t have a room of script magicians to write them out of the problem.  These weapons are usually very simple to use.  Any tool that requires year to learn and five years to master will fall outside the definition of ‘tool-of-last-resort.’

Karambits have this tool potential.  The ordinary user can slip his little finger onto the loop and hold it in a hammer fist and simply claw his way out of danger trouble.  Placing your thumb on the back of curved spine will give you a little more feedback.  Are we not trained to touching things with our thumb?  The same almost autonomic reflex helps guide the blade.

Held in the reverse grip, the blade juts out of our fist like a prehistoric claw, perfectly situated for close infighting moves. Small wonder folding karambits are so popular.  Closed, they are easy to conceal, a basic impact weapon and open, it becomes so much more.

In the hands of someone with more training than I, the karambit has multiple applications.  The dull spine can be used use to trap and control opponent’s arms and balance, making a range of other physical responses available.  The razor edge lets you transition from physical control to higher levels of force almost instinctively. 

Folding karambits have some problems.  Opening isn’t always easy and fingers can get in the way of the edge.  Lock and pivot points wear and fail from applying load on the spine or side of the blade.  All knives direct the load into the handle but the twisting load generated by using the blade as a control device can cause handle failures.

Joe Caswell, karambit
CRKT's Provoke, designed for LEO and people in dangerous places



Many of the devices used to open the blade as you remove it from your pocket don’t assist you opening the karambit if you are holding it in your hand as an impact tool.

CRKT has taken Joe Caswell’s design and produced the Provoke It is a unique knife that may change how we open and close folding knives.  Your fingers are never in the path of the blade when opening or closing.  The blade is firmly locked in place by two stout arms.

closed Provoke, knife, karambit
The front of Joe Caswell's innovative folding karambit 


The problem is opening from the pocket draw.  The optimal opening has the index finger through the ring and the dull spine against the palm of your hand.  The thumb presses the back pivot point and the blade pops open.

Caswell, folding karambit
Back side of the Provoke.  The clip holds the knife deep in the pocket.  What you see doesn't look like a clip.


Here’s a right and left hand draw with opening showing the finger movements I use.  It looks clumsy when shone slowly to reveal finger movement.  It’s not.  Practice for ten minutes and it will feel completely natural to you.


Left side opening.  I needed to pivot out of the camera view to show the opening.  You really don't hold it like a soiled tea bag. 



Right side opening.  The knife must slide from the thumb to the index finger


It’s not an inexpensive knife and has limited general application.  Its cutting edge design and manufacturing has built in a high degree of reliability.  It is last-chance-tool to claw your way out from under the casket lid. 

Find yours at https://www.crkt.com/provoke.html.  MSRP is $200.00.  Cheap at that price.


Saturday, February 2, 2019

The Finnish Butterfly


After college and having found a real job I discovered I had a little extra spending money.  I was entranced by a red handled folding knife that could be best described as a butterfly knife from Finland.  Of course I satisfied that itch.

Puukko Folder, Finish butterfly knife
Hackman Folding Puukko

The blade doesn’t have a tang stamp and the only identification is “Hackman Finland” molded into the red plastic handle.  The 3.75 inch blade is a saber grind with a small secondary bevel that forms the actual cutting edge. 

The blade is an unknown stainless steel.  I’ve had it for years and no evidence of rust has appeared, despite the minima care I’ve given it.  And the plastic has also held up quite nicely.  I filed a small choil in the blade to separate the edge from the ricasso.  It was thought, with some justification, that without the choil you would damage your sharpening stone by chipping away it’s edge. 

In retrospect I realize was all I really accomplished was to add a stress riser in the blade.

Hackman was a cutlery and cookware company founded in Finland in 1790.  Later it was bought by the Iittala Group.  In 2007, littala was swallowed by the Fiskars Corporation.  Fiskars never, in my opinion, understood the American knife market and even now needs to make up for lost ground.


Finnish, Folding knife, linkkupuukko
The folding Puukkko closed and latched

The Hackman butterfly knife was better known in Finland as Linkkupuukko, or "latch-knife". The marketing boys positioned it as a retkiveitsi or "camping knife" and later as ErƤpuukko or "wilderness puukko."  By now you should associating puukko with Finnish for knife.  I want to thank the unknow commenter who told me veitsi is Finish for knife.  They were kind enough to inform me thay puukko is a particular type of veitsi.

The Hackman story begins when Johan Friedrich Hackman was awarded the right to establish a trading house in the Hanseatic city of Vyborg.  He soon had a successful timber goods business on his hands, but like most businessmen he sought out new opportunities.  West of him was the territory now known as Finland.

In the early 1800s Hackman bought Sorsakoski – a small factory community in eastern Finland.  The purchase included a sawmill, flourmill and a brick factory.  Hackman’s cutlery business began in nearby Vyborg in 1876, headed by his son also Johan Friedrich Hackman.

Junior moved their entire cutlery manufacturing business to Sorsakoski in the early 1890s. The factory community was a mirror of Finnish society at the beginning of the twentieth century.  Companies like Hackman took full responsibility for providing basic services to their employees.  Sounds a little like the American coal mining companies and the company store, doesn’t it?

In 1902 Hackman began manufacturing new low-cost cutlery items forged from a single workpiece. The introduction of quality stainless steel in the 1920s revolutionized the entire cutlery business.  By the 1960s design legends like Kaj Franck and Bertel Gardberg had designed iconic cutlery collections for Hackman.

The black handle version of the knife seems to have a sordid past or excellent present day marketing.  There are rumors, highly unsubstantiated rumors, that CIA agents were issued the knife for Vietnam.  If anyone has any real knowledge I’d sure like to hear from you.

This makes some limited sense.  The knife isn’t made in the USA and being caught with one might not brand you as an imperialistic agent.  The mechanism is simple and robust, perhaps perfect for undercover work.  Being inexpensive, ditching the knife if you were being followed or mouse-trapped didn’t require a huge sacrifice on your part.

However, it isn’t likely you can call up the CIA and speak to the quartermaster and expect to get a straight answer.  That’s where the marketing comes in.  It’s easy to say on ebay that the knife is from the CIA / Vietnam issue era.

Recently, Spyderco added some credibility to this story in their April Newsletter:
" While the Finnish Hackman Camp Knife, a balisong-style folder rumored to have been issued by the CIA in Vietnam..."

There’s a story here and perhaps one day we’ll know it in its entirety. 

Post script:  At the Novi, MI April 2023 show, I saw a black handled Hackman butterfly knife.  Like the red one, the blade did not have a tang stamp or other markings.  But the knife wasn't completely sterile as I had expected.  Impressed on one side of the black handle, where the words Hackman Finland in very small letters, about half the size as the embossing on the red handled knife.

The knife was in very bad shape and I now have buyer remorse that I didn't buy it.  

Does this resolve the CIA story.  No, with out some province from someone who was issued or worked with a agent and saw the knife, the question remains unanswered.

Damn it, I should have bought the knife!

Monday, January 21, 2019

Q Branch Knives

WWII wasn’t the first war to have enemy combatant’s dressed as civilians. But it is the war we seem to most associate with covert weapons and spies.  The problem for agents and spies is a weapon found on your person discredits your claim that you’re something harmless and can be ignored.  Yet having a last resort weapon could be the difference between death by torture and escape.

OSS and later the CIA developed little hideaway last resort tools for their agents as did many other domestic and foreign agencies.  We are fascinated by these James Bond devices.

training page OSS, Thumb dagger, lapel dagger.
Agents tied a small cord around the metal to provide them with a loop and more friction surface.
There probably isn’t anything more fascinating then the OSS “lapel dagger.”  It was just a small thumb-size flat piece of sharpened steel that could be sewn behind lapels, inside pockets, or just about any place. 

The key to placement seems to be to:
One: sew it where it wouldn’t be found in a quick search,
Two:  sew it where arresting officers would expect you to place your hands in response to their orders.

I had always wanted an authentic one, but twenty years ago A.G. Russell came out with their version of a undetectable lapel dagger.

A. G. Russell stealth lapel dagger


It is about 3.75 inches long with a 2.5 inch double sided blade.  It’s made of plastic and frankly, I don’t think it would survive more than a couple quick stabs before the blade snapped.  But that’s all you might need to get your feet under you and escape.

Undetectable weapon, stealth lapel dagger
I don't believe it has the weight or strength for the two techniques shown above
It came with two plastic sheaths so you could move the dagger between coat and another location.  One can almost see Bond moving it from his suit coat to his pants pocket unnoticed.  Each sheath has small holes to facilitate sewing.
At the time Russell also came out with a dagger shaped like their Sting but made from nylon filled with glass fiber.  It was advertised as a CIA letter opener.  I remember the claim that you could resharpen it with a coarse file.

The knife is about 6.75 inches long with a 3.25 inch blade and 3.5 inch handle.  It is substantially sturdier than the lapel knife.

AG Russell CIA letter opener.


Both of these were on sale during the very early days of metal detectors at airports.  At this time you could carry a smallish knife like a Spyderco Delica through security.  You declared the knives by placing them in a small basket with your wallet which bypassed security.  There was often some question about partially serrated edges, but most of the time the knife passed and you carried it on the plane.

Don’t even think about it today!


But at this time they are out of stock.

Cold Steel makes a variety of plastic knives that are almost undetectable.  They used to come with removable metal rings to ensure they could be seen when x-rayed.  They may have simply given up on the pretense of detectability and saved the customer the problem of removing the metal rings.

Lansky also makes a very passable plastic dagger they promote as a box or letter opener.

I guess they assume your opponents will be named Box or Letter

Sunday, January 13, 2019

TOPS - 3 Bros First Look




Have you noticed how things come in threes?  Three leaf clovers are common.  Winning card hands can be three of a kind, or perhaps menus give you three choices from three different selections each containing three different dishes.  Maybe you have three bourbons on the shelf?

Why not knives?  TOPS thought.

3 Bros   Knife
Don't forget TOPS trademark whistle!



Face it; most of our cutting chores are small.  We need a small utility knife, but considering the world we live in, we want max performance.  Why not put three different blade configurations, Hunter's Point (spear point), Tanto and Sheep's Foot blade in a small belt carry package.  Well, that’s what TOPS Knives has done.  They call it 3 Bros.

So who is TOPS?

In 1998, TOPS Knives was founded to create the highest-quality knives using the extensive knowledge and real life experiences of Military Operatives, Law Enforcement Officers, and outdoor professionals.  Perhaps the best part, all TOPS knives are manufactured and hand-finished at their facility in the Rocky Mountains, USA.

TOPS Knives have been requested and deployed in "Hot Spots" all over the world. Numerous individuals who are or were Field Operators have used these knives and report top performance and reliability when their lives depended on the tools they had with them.  That’s a pretty hard claim to top.

The 3 Bros are also very easy to carry everyday. Even in the sheath, one of these knives only weighs 2.8 ounces.
Specs:
Overall Length     4.27 inches
Blade Length       2.00 inches
Cutting Edge        2.00 inches
Blade Thickness  0.120 inches
Blade Steel          1095 steel hardened to RC 56-58
Handle Material    Black Canvas Micarta
Knife Weight        1.9oz

You can purchase one, two or all three.  For a little extra you can go with serrations and/or camo finish.  I’d hate to break up a family, so I got all three.

TOPS fixed Blades
The small size was not found to be a limitation with daily chores.


Each knife has three deep depressions on the spine.  It’s a little aggressive for naked skin but fine for the glove hand.  Each knife has a deep bolster which acts as a finger guard to prevent hand injuries from sliding onto the blade.  The edge goes just about all the way to the bolster and there is no ricasso. 

The blades are a flat-sided saber grind ending at a shoulder about one third of the way on the blade.  This provides sufficient room to grip the blade by thumb and forefinger while the ring and social finger grip the Micarta disk on each side of the knife.  The disk provides a nice anchor point even if you are wearing gloves.

TOPS 3BR tops knives
The small sized was not a factor wearing gloves.  The micarta disk provided sufficient grip as did the massive jimping.


TOPS blades are made of 1095 steel and they recommend an 18-20 degree sharpening edge.  These knives can be sharpened with ordinary stones but can also be sent to TOPS for a new factory edge.  The warranty card spells it out for you.

I’ve never owned a TOPS knife that didn’t perform.  The 1095 steel will hold an edge, but will need resharpening with use.  The steel needs to be taken care of with a protective coating of oil or corrosion inhibitor.  If you anticipate needing it for food preparation or consumption, make sure you use food safe oil.  Nobody likes the trots!

You can get yours at:  https://www.topsknives.com/3-bros
A single knife is $70, but they’ll deal you all three for $160.00. 

Thursday, December 27, 2018

Souvenir Knives



 When it comes to souvenir knives, I’ve got to go with historic references.  A knife that simply says Disneyland doesn’t float my boat.  But given the option of an event occurring at a specific time and place, well I’m a sucker for it.  

I can easily understand military collectors.  There are so many extraordinary events happening to ordinary Joes and Janes and their stories are told in the badges and mess kits they carried.

So when I had the chance to buy a brass-sided knife from the 1982 World’s Fair held in Knoxville, Tennessee I bought it.  The tang stamp identifies it as made by Parker Cutlery in Japan.

brass sided knife
The letters are so small I needed a magnifying glass to read them.

The 1982 World's Fair, formally known as the Knoxville International Energy Exposition, was themed "Energy Turns the World."  It opened on May 1, 1982, and closed six months later on October 31, 1982.  The Sunsphere, a 266-foot tower topped with a five-story gold globe, still remains and can be seen in Knoxville.


Souvenir knife 1982 worlds fair knoxville


James F Parker founded the company as a sideline to his employment as a paint sales rep.  He was one of the first to effectively utilize direct mail services to buy and sell collectable knives in the 1970s.  He used a stylized logo of an eagle with its wings spread.  He helped start Frost Cutlery by partnering with James Frost in a short-lived partnership. 


one of several designs
One of the more recognized tang stamps from Parker Cutlery

The commemorative knife business can be very confusing.  Parker had knives made by both Schrade and Rodgers-Wostenholm in addition to his own production.  As his business evolved the tang stamp changed, reflecting involvement with his brothers, purchasing of the Japanese company Imia and then Rodgers Wostenholm USA Ltd which gave him the right to use the IXL trademark.  In January of 1989, Parker purchased the W.R. Case and Sons Cutlery Co.

There can be no doubt that James Parker was a player in the knife world stage!  Knives ranging from good to yuck quality were produced both for the souvenir market and cutlery trade. 

In 1990 James Parker declared bankruptcy.

I find it interesting that I am unable to find a Wikipedia entry about Parker or his knife company.  Even Case knife histories fail to mention their brief ownership by Parker.  All I could find out through my limited search of the Internet was Case is currently owned by Zippo Lighters.

(Most of my information on Parker was liberated from Collector Knives by C. Houston Price.)

After that little historic jaunt, I’ve still got a very nice historic souvenir worth five dollars on E-Bay.  It doesn’t look like the blade was sharpened and I’m going to leave the brass with its patina.   Now, if I can only find an elongated penny from the fair, I would be a happier camper.