Sunday, March 29, 2015

Knife Expo

I'm flogging WRCA's Warther Memorial Knife Expo pretty hard for a variety of reasons.

One: I liked Dale Warther.  I didn't know him as well as some club members did, but I was always happy to see him.

Two: It's a good knife show.  I'd like to see more custom builders, but we're working on that and have asked several new ones to attend.  This show will give collectors a chance to see some really great knives.

Three: A number of club members think the club will fall flat on it's collective face.  We've had trouble with the last couple of places and we are trying to find a permanent home.  Everything is expensive as compared to times when gasoline was a $1.25 a gallion.  This location is no exception.

The knife show will be May 16 and 17 at the Buckeye Expo center in Dalton, Ohio just off of route 30.  Admission is $5 per person but we'll wave the fee for scouts and military in uniform.

 I suspect you'll find just about any kind of knife you're interested in at the show.

We are also running a great raffle with prizes over $1000.  Second price is a ZT 350STTS AND a Benchmade 531 Pardue AXIS.  I sell Benchmade and I can't get this one!

Here's the raffle flyer and I hope to see you there!!!

Knife Show Raffle
If i win first prize, I'll offer to trade with the second prize winner!!



Monday, March 2, 2015

Knife Expo Raffle Prizes

The 2015 Dale Warther Memorial Knife Expo is coming on strong.  We just found out what the raffle prizes will be:
  • 1St place: Randall Combat Companion
  • 2nd place: 2 knives, a ZT 0350STTS and a Benchmade 531 Pardue Axis
  • 3rd place: Warther Kitchen Knife set with block.
  • 4th place: knife roll

This is over a $1000 in prizes but  you can't win if you don't buy a ticket or three.  I’m going buy a dozen tickets myself!!!

The Expo is May 16 and 17 and admission is just $5 at the Buckeye Expo Center in Dalton, Ohio.  It’s just off route 30. 

We still have tables left for makers, sellers and collectors.

Contact Darlene at darlene5674@att.net or check my page  for copies of the registration form.

Wednesday, February 25, 2015

Television Knives


Crime drama and knives, they are like bacon and eggs.  Seldom do you find one and not the other.  If you’re a police/CSI/crime show fan, it’s not too unusual to recognize one or another.  “Burn Notice” almost always featured a knife of the month.

Many shows solicit props from many companies.  Did you note the new auto sampler on the duex ex machina that solves the problem for the good guys?  They didn’t buy it, they asked if they could borrow one from some scientific instrument maker.  

I especially love that orange column Zeiss Transmission Electron Microscope in the back of Dexter’s lab.  I know what I use a TEM for, but what a blood splatter analysis does with it, that beats me.  I’ve seen it in other crime labs since Dexter is off the air.  I wonder if shows fight over who gets to use it next?

Spyderco usually provides knives for the movies, but they request the knife is used by a good guy.  That doesn’t seem to happen and Dr. Lector ends with the knife in the shadows.  It appears other companies also provide knives.

Last week I found an Emerson CQC-8, I believe, in the hands of a killer on CSI-Las Vegas (Under My Skin).  The Emerson wave was very obvious.  I’m not sure having a killer use your products translate into sales.  Did “Dexter” generate increase sales in Saran Wrap and duct tape?

CQC-8 combat knife



A little later I caught an episode of NCIS: New Orleans in which wound measurements identified the murder weapon as a “Benchmade steel knife.” That must be an amazing database.  I can’t even begin to imagine what kind of calculations and measurements you would need to identify the knife brand based solely on cuts in elastic flesh

So, I also got out my Benchmade catalog, and discovered, all their blades are made from steel.   It’s good to know they don’t makes blades out of glass or ice.  I might order the wrong type.


Thursday, February 12, 2015

Ivory


If you have been following the news on the ivory ban you know people are polarized on the subject of ivory.

One side claims elephants are being slaughtered left and right for their tusks and ivory should be banned from the US markets.  The other side claims we should protect the elephant by assisting the countries who are attempting to stem the poaching.  This side also claims the vast, vast majority of ivory, legal and illegal, is sold to the Far East and China.

stacks of illegal ivory
700 African elephant tusk seized by Malaysian authorities on their way to China


The politics and enforcement of stopping ivory poaching by making ivory illegal are convoluted and difficult.  One small example is teeth from the sperm whale.  These cone shaped teeth are prized for their value in scrimshaw.  By 1988 civilized nations stopped hunting the endangered sperm whales.

So to protect these whales, scrimshaw art drawn in the 1800s and 1900s on teeth from whales killed then are taken from their owners and destroyed.  No rational explanation seems forth coming on how this helps whales in 2015.

This same approach is applied to ivory.  The USFWS (US Fish and Wildlife Service) has moved to block the sale and when possible, effect the confiscation of ivory.  Your problem is you have to prove your ivory isn’t elephant and wasn’t collected since the US ban on elephant ivory in 1986.

USFWS and their agents simply assumed it is illegal elephant ivory and will take your property as well as anything else you might have.


USFWS has had its funding for this search and destroy mission blocked.  So states are jumping on the bandwagon.  I suspect politicians realize the relatively small number of ivory collectors, knife makers, musicians, and scrimshaw artists and the wealth of their pocketbooks make them vulnerable.  After all the few votes politicians lose are nothing compared to the votes and publicity they gain by taking an meaningless anti-poaching stand.   States like New York and New Jersey have these politicians and frankly, they don’t care about the people in their state.  California, Iowa, Washington, and Connecticut are introducing these bills.

So it comes as no surprise that a 72-year old woman was arrested in New York for trying to sell a necklace containing mammoth ivory at an antique show.  

You should realize that all mammoths were extinct long before our country was founded. 

I have an old walking stick that was owned by my wife’s grandfather.  He came over third class from the old country to make a better life for himself.  My mother-in-law describes him as “a sport.”  So it’s not surprising there are several quarter inch-square chips of ivory forming a collar set in the dark wood.

If the government has its way, I’ll never be able to sell that stick or quite possibly give it away.  I don’t have any ivory handled knives, but I do have several white bone knives.  Will I have to prove, someday, after they are confiscated that they are not ivory?

I urge you to contact your representatives, both federal and state, and urge them not to support the ban on ivory trade.  Urge them to support laws that protect legally owned ivory.

I once read that the slippery slope argument was a logical falsity.  Maybe at the debate contest, but to people working in the actual world it’s a truth.  Don’t let political bureaucrats and politicians push you down the ivory slopes.

Cut Up



How about it? 
 A nice knife massage will straighten you out.  I know people that could use a nice knife massage.  I bet you do too!


Knife Massage Training Class?????



While you could get one in New York City or Detroit the one I have in mind is best found in Taiwan.  They get repeat customers!




Thursday, January 29, 2015

S&W vs Benchmade

Sounds like a mismatch, doesn’t it?  S&W knives are made by Taylor Brands, makers of flashlights, Uncle Henry and other products.  Benchmade makes, well, they make really good knives. 

Let me introduce our two challengers, S&W MP1600 an auto knife and Benchmades AFO II Auto.

Out of the box, each knife looks different, and the differences are more than skin deep.  The S&W has a relatively smooth, graceful black handle with a sliding lock next to the opening button.  The button itself is fully exposed on the handle.  There is no jimping to increase the friction between handle and hand.  The front bolster offers scant protection to prevent your hand from sliding forward onto the blade.   This may not be a big concern to you.   If your perceived use is cutting fir sticks, butchering a rabbit, opening cardboard boxes this handle will have no surprises in store for you.


S&W automatic knife
An S&W automatic knife.  The safety is right next to the opening button.

 But if you envision needing to cut a coconut open, making a violent, full power stab into something with hard spots, as well as open your mail, this knife may bite you back.

The AFO II has a dull black surface that feels gritty.  For me, it’s like running my nail over a chalkboard.  Jimping on top and bottom of the handle tip and tail provide additional friction surfaces.  The lines of the handle aren’t as smooth or flowing and a swelling at the bolster helps keep your hand away from the knife edge.  This knife also sports a metal glass breaker tip.  The lock is on the spine 90 degrees away from the opening button.

AFO II knife
Benchmade's AFO II   Jimping provides extra friction surfaces.  Glass breaker is small and not painful if you accidently palm it.
The AFO II clip is interchangeable to four positions, including the button side.  In the tip down position the knife rides high in your pocket.  Move the clip to my favorite position, tip up, and the knife rides a little lower in the pocket.

The S&W clip can be removed, but it’s drilled and tapped only for right side tip up.  It lets the knife ride low in your pocket, virtually unnoticed to the casual observer.

Lets looks at the numbers!
Feature
S&W 1600
AFO II
Open length
8.2 in
8.5
Blade length
3.7 in
3.6
Blade Steel
S30V
154CM
Blade Thickness
0.134 inch
0.123
hardness
?????
58-61 HRC
Handle
Aluminum
Aluminum
Weight
5.8 ounces
4.8 ounces
Price
$160
$245
Made in
USA
USA

All and all pretty even except for price.  The big surprise was the S30V steel in the S&W.  Almost as big of a surprise was the differences in spring tension.

Any automatic knife that doesn’t have enough spring to push the blade to the locked position is a pretty sad knife.  The auto’s only reason to exist is to propel the blade to the lock position, otherwise you have an ordinary one handed opener.  But what if something momentarily stops or blocks the blade from reaching the full open position?

One of two things can happen depending on the spring.  The spring has enough strength to kick the blade into the lock position or the blade just dangles until you add a flip with your wrist.  I don’t have scale or a testing device that can measure spring strength, but let’s look at it from another way.  How much do I have to cock the blade so if I release it from that position, the blade will return to the locked open position?

For the S&W, about 110 degrees from full open.

For the AFO II I couldn’t find any blade position that did not return the blade to the full open locked position.
In other words, the AFO II will always open, even if the blade meets obstructions as soon as the blade clears the obstruction.

The S&W, not so much.  If the blade is stopped in the first 80 degrees of opening, it should finish opening.  Be prepared to wrist flip it open in another position.

The other big difference is the safety.  The safety on the S&W locks the blade closed.  It can’t be bumped off and the blade can open.  The safety doesn’t do anything in the open position.  The AFO II safety will lock the blade open or closed.  When the safety is on, that blade isn’t moving from its open or closed position.

Both knives are available in tanto and drop point as either serrated or plain edge.  And both have a lanyard hole if you chose to use that.

Since neither knife belongs to me I can’t test the edge.  But I have always found that other Benchmade knives cut better and retain an edge longer than their significantly less expensive S&W brothers.  But with the use of a high end steel, S30V, that might no longer be true.

Who wins?

One important lesson to remember is, function should define form.  In a combat role were self-defense is the card that trumps all others, I would go with the AFO II.  It has a heaver spring that, in my limited tests, always opens.  The lock is smaller and on the spine but I would feel more comfortable carrying the knife in a pocket or tucked in my waistband.  The shape of the handle and it’s surface finish will help you keep your grip.

The large and easy to find safety and the highly exposed button on the S&W would make me uncomfortable throwing myself down behind cover or fighting in small confined area.

However, there is an $80 dollar difference.  If your world consists of relaxed fit pants, gathering at the barbecue to swap lies, and the most stressful situation you think you’ll be in is pulling the guideline of a tent with one hand and cutting the rope with the other, the S&W 1600 could be the right knife.


I very much liked the Benchmade AFO II over the S&W.  But don’t be fooled by this statements.  If you somehow slipped me an S&W 1600 when the fecal material hit the impeller, I would be very grateful!

Sunday, January 25, 2015

My Side of the Table

It was an interesting knife gun show this month.  I typically only do one show a month because weekends are so valuable.

Saturday at Medina was packed.  At one point all the parking spaces on pavement were filled and only the brave with 4-wheel drive parked in the soupy, muddy fields surrounding the area.

I’m always amazed by the people that pickup a knife, study it, then announce it’s exactly what they are looking for, only to put it down and walk away without another word.  If it is exactly what you want, why are you…?  I guess people simply don’t know how to say thanks and put the knife down.

I have found a way to deal with that species of shopper, the Common Flicker.  You’ve seen them, maybe you are one. 

They pick up a knife and flick it open and flick it open and flick it open endlessly.  I wonder if we let them, if they would still stand there forever caught in an endless cycle of flick-close, flick-close.  A distant cousin also tries to see if the blade wiggles in the frame after four or five clicks.  In either case this cycle will be repeated.

When I observe this behavior, I state that they really seem to like that knife.  I usually get an agreement to that statement, so I simply ask them if I can wrap it up for them.  That pretty much halts the behavior and causes them to vacate the area around my table.  Several left so quickly, a thunder clap occurred when air rushed in to fill the space they had previously occupied.

Look, I don’t care what kind of torture test you want to carry out on your knife, but until you buy it, they are my knives and you can’t treat my property with disrespect.

Sunday the really interesting buyers came out.  A father stopped by with his 10 (?)-year old daughter who likes to throw knives.  They have a target set up for her in the backyard and it’s reported she pretty good at it.  Should be interesting when she starts to date and the boy gets a little too handsy.  I wonder if she’ll give him a head start.  She also collects knives, but she’s a little shy and doesn’t like to handle them.  She saw several she liked, but turned down dad’s offer to buy her one when she found out they were liner locks.  She doesn’t like to close the knife around her fingers.

Later we were treated to couple of women who looked at several knives but wanted to shop around a bit.  When they came back we got treated to about a half hour of lesbian drama.  One woman could not decide which of the two knives she wanted.  I wasn’t about tell her which to buy; it’s much too much a personal decision.  Her partner tried to empower her to buy one or the other or both.  Sadly, I knew after the first 5 minutes this sale was going nowhere and it did.  At least it was entertaining.



Frankly, I liked the two women, they seemed very nice.  In earlier times they would have been described as “sharing the same pillow.”  Sounds romantic to me.

Later we had an elderly man walk up to the table.  He wordlessly picked up a Spyderco Tenacious and studied in great detail.  After several moments of complete silence, he took out a magnifying glass and studied it even more! 

Finally he put the glass away, put the knife down, pivoted on his heel and walked away, mission complete.  I still don’t know what was going on. 

The Tenacious is made by Spyderco in China.  I have always thought their byrd line was a practice run at making quality products in China.  If they had been unable to do it with byrd, they would have, in my opinion, dropped the line and went else in search of cheaper labor.

Later we had a fellow ask try to negotiate a $17 knife down to a $15 knife.  I said no, but he bought it anyway.  
Trust me, it's worth $17... period.

Many people see gun or knife shows as a flea market or mid-eastern bazaar and want to negotiate.  I can’t blame them, money is still tight.  But after listening to him tell the table next to me how much money he makes, I wasn’t too sympathetic to his attempt to negotiate less money in my pocket. 

Sunday was winding down, when the peace was broken with a loud “BANG!” and everyone’s thoughts turned to the accidental shooting we had little over a year ago.  I didn’t think it was a gunshot as the sound wasn’t sharp enough, but the place still got very quiet.  

I walked over when it appeared that nothing significant had happened.  I didn’t smell gun or flash powder, but it was announced that someone with a nasty sense of humor set off some kind of firework.  They also warned that if they found out whom it was the police would arrest him.

In any case it was an interesting week-end!