Monday, September 16, 2013

It’s Kydex Time!

I’ve started fooling around with Kydex again.  I bought some thicker Kydex at the Blade Show and made my first knife sheath out of it.

I’ve owned an original DPX HEST designed by Robert Young Pelton for several years.  I like the knife.  It’s a nice size fixed blade knife: a three-inch carbon steel blade with a four-inch handle.  The knife has a built-in bottle opener and pry bar as well as a small compartment in the handle for survival gear, like folded twenties or fish hooks.  Hey, you survive your way and I'll survive my way.

Kydex sheath that comes with DPX HEST
DPX HEST Original sheath.  Laughing skull in ball cap is Pelton's trademark. 


The original sheath doesn't have a belt loop.  What it has is paracord you use to lash the sheath to your belt.  I was never comfortable with that.  It’s better than simply slipping it in your pocket, 
Other side of knife
Reverse side of knife and sheath.  The washer is to undo the screws in the handle.  Clever, huh?
but it always seemed like an easy way to lose the knife.  Maybe that was the Pelton’s idea.

In the fictional world of Matt Helm, Matt explains to the readers that most undercover agents don’t carry a sidearm in a holster.  Why?  Because you can ditch a gun fast enough, but it might be a little hard explaining why someone claiming to be a harmless tourist is wearing an empty holster.

Maybe the same thing applies to this knife.  Imagine you’re traveling through areas of the world where every other mile another thug claims to be the Supreme Warlord and National President-Elect-for-Life and he has no use for the papers and visas you’re carrying.  If you have to, slip the paracord loose and the knife falls away from you and it becomes easier to convince this or the next warlord you are completely harmless.  No difficult sheath to explain.

Still, I need to hang on to my knife a little longer, so I got out the Kydex and spent a few hours re-learning how to do it.  It’s not perfect, far from it.  
My first attempt in Kydex this year
I got some thicker Kydex and started to work with it.  I just got all black Chicago screws that need to be cut to length and then I'll replace the bright aluminum screws.
The belt loop fits an impossibly thick belt.  I've got to get a thinner form.  Most of my rivets, grommets and Chicago screws are too short.  I just squeaked by with what I have.  The 0.1 inch thick Kydex has a larger radius of bending as compared to my thin blue stuff, so most of my forms don’t work.  It’s also a lot stiffer, so most of the methods I use to lock a knife in a sheath don’t work as well.

I need to work on a thinner belt loop
The thick kydex bends differently and I need a thinner form to shape my belt loops.
Still, I’m happy with the results.  The set of French curves I bought last year really helps in setting out the cut and grind lines as does my band saw and the new-to-me belt sander.  I’ll continue to make sheaths.  I’ve got a sweet little South African dagger that needs a sheath so I can carry it.



Tuesday, September 3, 2013

What's a Collection?



About a year ago I wrote about box cutters.  I had bought an older box cutter from W.T. Rogers Co.  It cleaned up nice and I also had a box cutter I used in high school so I figured the two of them were worth a few hundred words. 

 
collection of box openers
Rogers box cutter, the start of my collection

While I was attempting, much in vain, to discover a little bit about the Rogers box cutter I remembered a cutter I had gotten at Lincoln Electric.  That made three.  That left me with a nagging suspicion I had a collection of box cutters.   

We’ve all read about people with the collecting bug that can’t seem to find a niche.  One day their heirs find that they had 2 of these and 7 of those and a couple of everything else, but not one complete set of anything.


So how many of anything makes a collection?


Can we assume it takes more than one?  How about two?  Two is just a pair at best so it’s got to be more than two.  Three is right at the edge of collecting, especially if there is some geographical or chronological difference among all three members of the proto-collection. 


Four.  It takes four objects with something in common to start a collection.


It’s official!  I took the plunge and bought a fourth box opener.  I’ve transitioned from being an accidental collector to purposefully collecting box openers.  


I was at a flea market and saw one in a box of stuff.  It said Jim Beam on it.  The red coloration on the sleeve was in good shape, no nicks from being carried with pocket change or being dropped, and the metal blade holder had a small touch of rust that cleaned up nicely.  (See, I’m already using jargon like sleeve and blade holder, a sure sign of collecting!)

The addition of this red box openers made my collection a real collection
Jim  Beam box opener. Now my collection is on firm ground.

Unfortunately the Beam box opener is completely sterile.  The box opener is completely void of the name of the distributor, manufacturer or any other identifying marks.  Zip! Nada! Nothing!  Clearly a covert box opener!  If it was black it would be tactical.

There may be a database out there somewhere, but I’d hazard a guess it doesn’t exist.